Welcome! Log In Create A New Profile

Advanced

Re: least_conn not working for me

December 23, 2020 04:44PM
Thanks for the detailed response and taking the time to show some test
examples.

We did think that perhaps it was buffering.
However, in our case, the "large" request is gigs in size, so there is no
way that it is buffering that whole thing. I think our buffers are pretty
small.
Unless there is some absolute black magic that will buffer what it can,
close the upstream, then open it again to ask for more of that file. :)

I'm going to try what Peter suggested and check the netstat to at least
confirm whether it is actually connected to the upstream still.
Worst case I'll then simulate the same on our end with the limit_rate.


On Wed, Dec 23, 2020 at 4:26 PM Maxim Dounin <mdounin@mdounin.ru> wrote:

> Hello!
>
> On Wed, Dec 23, 2020 at 12:36:16PM -0500, kenneth.s.brooks wrote:
>
> > Thanks for the response.
> >
> > I understand what you are saying about the worker processes. We have
> only a
> > single worker process.
> >
> > I have 2 upstream servers.
> >
> > To validate:
> > I am sending a request for a LARGE file. I see it hit server1. Server1 is
> > now serving that request for the next couple of minutes.
>
> Note that the fact that server1 is actually serving the request
> needs some additional verification. As a web accelerator nginx
> normally ensures that upstream servers are free to serve additional
> requests as soon as possible, so if the limiting factor is the
> client speed rather than connection between nginx and the upstream
> server, nginx will happily buffer the response and will serve it
> to the client itself. And there will be no active connections to
> server1, so least_conn will behave much like round-robin.
>
> > I send a request for a very tiny file. I see it hit server2. It finishes
> > (server1 is still processing request #1)
> > I send a request for a very tiny file. I see it hit server1 (even tho it
> is
> > still serving request #1 and server2 is not serving anything)
> >
> > I repeat that over and over, and I'll see all the subsequent requests
> being
> > routed to server1, then 2, then 1 then 2.
> > If I submit another LARGE file request, if the last request went to
> server2,
> > then now I have 2 LARGE file requests being served by server1.
> >
> > If I submit more requests, they all continue to be equally distributed to
> > server1 and server2 (even though server1 has 2 active things it is
> > serving).
>
> This behaviour corresponds to no active connections to server1, as
> might happen if the file is not large enough and instead buffered
> by nginx.
>
> > Is there some sort of a 'fudge factor' or threshold? That there has to
> be n
> > number of requests that one server is handling more than another
> server? I
> > wouldn't think so, but I'm at a loss.
>
> No, nothing like this.
>
> Just in case, here is a simple configuration which demonstrates
> how least_conn works (by using limit_rate to slow down responses
> of one of the upstream servers):
>
> upstream u {
> server 127.0.0.1:8081;
> server 127.0.0.1:8082;
> least_conn;
> }
>
> server {
> listen 8080;
>
> location / {
> proxy_pass http://u;
> }
> }
>
> server {
> listen 8081;
> limit_rate 10;
> return 200 "slow\n";
> }
>
> server {
> listen 8082;
> return 200 "fast\n";
> }
>
> And a test:
>
> $ for i in 1 2 3 4; do curl -q http://127.0.0.1:8080/ & sleep 0.1; done;
> sleep 15
> fast
> fast
> fast
> slow
> [1] Done curl -q http://127.0.0.1:8080/
> [2] Done curl -q http://127.0.0.1:8080/
> [3] Done curl -q http://127.0.0.1:8080/
> [4] Done curl -q http://127.0.0.1:8080/
>
> Note that requests are started with some delay ("sleep 0.1") to
> make sure fast backend will be able to respond before the next
> request starts. Note that only one of the requests is routed to
> the slow backed - all other requests are routed to the fast
> one. That is, least_conn works as expected.
>
> --
> Maxim Dounin
> http://mdounin.ru/
> _______________________________________________
> nginx mailing list
> nginx@nginx.org
> http://mailman.nginx.org/mailman/listinfo/nginx
>
_______________________________________________
nginx mailing list
nginx@nginx.org
http://mailman.nginx.org/mailman/listinfo/nginx
Subject Author Posted

least_conn not working for me

kenneth.s.brooks December 23, 2020 10:28AM

Re: least_conn not working for me

kenneth.s.brooks December 23, 2020 10:57AM

Re: least_conn not working for me

Maxim Dounin December 23, 2020 12:16PM

Re: least_conn not working for me

kenneth.s.brooks December 23, 2020 12:36PM

Re: least_conn not working for me

kenneth.s.brooks December 23, 2020 01:12PM

Re: least_conn not working for me

pbooth December 23, 2020 02:08PM

Re: least_conn not working for me

Maxim Dounin December 23, 2020 04:28PM

Re: least_conn not working for me

kenneth.s.brooks December 23, 2020 04:44PM

Re: least_conn not working for me

philw December 23, 2020 05:00PM

Re: least_conn not working for me

Maxim Dounin December 23, 2020 05:16PM

Re: least_conn not working for me

kenneth.s.brooks December 23, 2020 05:40PM

Re: least_conn not working for me

kenneth.s.brooks December 25, 2020 08:04PM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 115
Record Number of Users: 8 on April 13, 2023
Record Number of Guests: 500 on July 15, 2024
Powered by nginx      Powered by FreeBSD      PHP Powered      Powered by MariaDB      ipv6 ready