Welcome! Log In Create A New Profile


Re: nginx slow at streaming flv or strange behavior

Maxim Dounin
April 22, 2010 06:32AM

On Thu, Apr 22, 2010 at 04:54:05AM -0400, vnjug wrote:

> I have installed nginx 0.8.35 (flv streaming and h264 module
> enabled) on my production video streaming server to see if it
> can perform better than lighttpd.
> However, lighttpd outperforms nginx
> + speed
> + throughput
> Here is my settings
> + CentOS release 5.3 (Final) with Lustre 1.8 patch
> + Kernel 2.6.18-92.1.17.el5_lustre.1.8.0smp x64
> + lighttpd-1.5.0
> server.network-backend = "gthread-aio"
> server.max-read-threads = 120
> server.stat-cache-engine = "fam"
> server.event-handler = "linux-sysepoll"
> server.max-worker = 25
> + nginx 0.8.35
> worker_processes 50; # I have tested with 4, 8, 20
> processes
> worker_connections 2048;
> sendfile on;
> tcp_nopush on;
> tcp_nodelay off;
> + iptraf is used to monitor network activity in real time
> All the video files is LustreFS based, network mounted. The real
> data is stored on 6 storage servers (Lustre OSS)
> I have configured 2 1-GB network cards: one for outgoing data
> (streaming via port 80) and the another for Lustre client,
> reading data from storage servers

You may want to use proxy instead of network filesystem (as nginx
normally blocks on file IO requests, which likely to block the
whole worker process for a relatively long time in case of network

Alternatively you may try to use aio in nginx, but

1. This doesn't help with mp4 streaming much, see below.

2. It has some known not-yet-fixed bugs which may cause socket

3. It requires O_DIRECT under Linux and this may not be best

> nginx
> =====
> When I turned nginx on, I saw strange things on network activity
> ( I used iptraf to see network activity per network cards)
> + Incoming data: data read from storage servers: 250 - 290
> MBit/s (better than lighttpd - see below)
> + Outgoing data: data sent to clients (flash players, VLC
> ...): 90 - 140 Mbit/s (much worse than lighttpd - see below)
> It means that nginx can read more data from disk than the
> throughput it can send to clients.

Mp4 streaming module is known to have non-optimal working model:
it get time position from client and then scans mp4 file for
coresponding file position. This may cause very strange effects.
Could you please confirm that you are seeing the same picture with
flv streaming only?


> But I still don't know why nginx is slower than lighttpd on
> sending data to clients while it can read more data from disk
> than the counterpart.
> Any thought?

You may try to play with:

1. Using sendfile_max_chunk (if not yet).

2. Switching sendfile off and tuning output_buffers instead (i.e.
use small number of big buffers, something like "output_buffers 1
512k;"). This is known to perform better when serving large files
as it reduces number of requests to disks. Alternative aproach
would be to tune your os sendfile() to do reads of appropriate
sizes, but I'm not sure it's possible under Linux.

3. Using aio, see above. Though I suppose it don't help with mp4
streaming as it uses blocking read()'s by itself.

4. Using directio and read_ahead directives.

5. Using proxy instead of network filesystem (and tuning proxy

Maxim Dounin

nginx mailing list
Subject Author Posted

nginx slow at streaming flv or strange behavior

vnjug April 22, 2010 04:54AM

Re: nginx slow at streaming flv or strange behavior

Maxim Dounin April 22, 2010 06:32AM

Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 193
Record Number of Users: 6 on February 13, 2018
Record Number of Guests: 421 on December 02, 2018
Powered by nginx      Powered by FreeBSD      PHP Powered      Powered by MariaDB      ipv6 ready