Sébastien,

The message about the signal process is only the beginning of the process..
You are interested in messages like the following:

> 2024/03/26 13:36:36 [notice] 723#723: signal 1 (SIGHUP) received from
> 69064, reconfiguring
> 2024/03/26 13:36:36 [notice] 723#723: reconfiguring
> 2024/03/26 13:36:36 [notice] 723#723: using the "epoll" event method
> 2024/03/26 13:36:36 [notice] 723#723: start worker processes
> 2024/03/26 13:36:36 [notice] 723#723: start worker process 69065
> 2024/03/26 13:36:36 [notice] 723#723: start worker process 69066
> 2024/03/26 13:36:36 [notice] 723#723: start cache manager process 69067
> 2024/03/26 13:36:36 [notice] 61903#61903: gracefully shutting down
> 2024/03/26 13:36:36 [notice] 61905#61905: exiting
> 2024/03/26 13:36:36 [notice] 61903#61903: exiting
> 2024/03/26 13:36:36 [notice] 61904#61904: gracefully shutting down
> 2024/03/26 13:36:36 [notice] 61904#61904: exiting
> 2024/03/26 13:36:36 [notice] 61903#61903: exit

Note the 'gracefully shutting down' and 'exiting' message from workers.
Also the 'start' and 'reconfiguring' messages from the master process.
There should be a similar sequence somewhere in your logs.
Having these logs may help explaining what happens on a reload.

Kind regards,
Igor.

On 26/03/2024 12:41, Sébastien Rebecchi wrote:
> Hi Igor
>
> There is no special logs on the IP_1 (the reloaded one) side, only 1
> log line, which is expected:
> --- BEGIN ---
> 2024/03/26 13:37:55 [notice] 3928855#0: signal process started
> --- END ---
>
> I did not configure worker_shutdown_timeout, it is unlimited.
>
> Sébastien.
>
> Le lun. 25 mars 2024 à 17:59, Igor Ippolitov <iippolitov@nginx.com> a
> écrit :
>
> Sébastien,
>
> Nginx should keep active connections open and wait for a request
> to complete before closing.
> A reload starts a new set of workers while old workers wait for
> old connections to shut down.
> The only exception I'm aware of is having worker_shutdown_timeout
> configured: in this case a worker will wait till this timeout and
> forcibly close a connection. Be default there is no timeout.
>
> It would be curious to see error log of nginx at IP_1 (the
> reloaded one) while the reload happens. It may explain the reason
> for connection resets.
>
> Kind regards,
> Igor.
>
> On 25/03/2024 12:31, Sébastien Rebecchi wrote:
>>
>> Hello
>>
>>
>> I have an issue with nginx closing prematurely connections when
>> reload is performed.
>>
>>
>> I have some nginx servers configured to proxy_pass requests to an
>> upstream group. This group itself is composed of several servers
>> which are nginx themselves, and is configured to use keepalive
>> connections.
>>
>> When I trigger a reload (-s reload) on an nginx of one of the
>> servers which is target of the upstream, I see in error logs of
>> all servers in front that connection was reset by the nginx which
>> was reloaded.
>>
>>
>> Here configuration of upstream group (IPs are hidden replaced by
>> IP_X):
>>
>> --- BEGIN ---
>>
>> upstream data_api {
>>
>> random;
>>
>>
>> server IP_1:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_2:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_3:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_4:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_5:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_6:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_7:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_8:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_9:80 max_fails=3 fail_timeout=30s;
>>
>> server IP_10:80 max_fails=3 fail_timeout=30s;
>>
>>
>> keepalive 20;
>>
>> }
>>
>> --- END ---
>>
>>
>> Here configuration of the location using this upstream:
>>
>> --- BEGIN ---
>>
>> location / {
>>
>> proxy_pass http://data_api;
>>
>>
>> proxy_http_version 1.1;
>>
>> proxy_set_header Connection "";
>>
>>
>> proxy_set_header Host $host;
>>
>> proxy_set_header X-Real-IP $real_ip;
>>
>> proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
>>
>>
>> proxy_connect_timeout 2s;
>>
>> proxy_send_timeout 6s;
>>
>> proxy_read_timeout 10s;
>>
>>
>> proxy_next_upstream error timeout http_502 http_504;
>>
>> }
>>
>> --- END ---
>>
>>
>> And here the kind of error messages I get when I reload nginx of
>> "IP_1":
>>
>> --- BEGIN ---
>>
>> 2024/03/25 11:24:25 [error] 3758170#0: *1795895162 recv() failed
>> (104: Connection reset by peer) while reading response header
>> from upstream, client: CLIENT_IP_HIDDEN, server: SERVER_HIDDEN,
>> request: "POST /REQUEST_LOCATION_HIDDEN HTTP/2.0", upstream:
>> "http://IP_1:80/REQUEST_LOCATION_HIDDEN
>> http://IP_1:80/REQUEST_LOCATION_HIDDEN", host: "HOST_HIDDEN",
>> referrer: "REFERRER_HIDDEN"
>>
>> --- END ---
>>
>>
>> I thought -s reload was doing graceful shutdown of connections.
>> Is it due to the fact that nginx can not handle that when using
>> keepalive connections? Is it a bug?
>>
>> I am using nginx 1.24.0 everywhere, no particular
>>
>>
>> Thank you for any help.
>>
>>
>> Sébastien
>>
>>
>> _______________________________________________
>> nginx mailing list
>> nginx@nginx.org
>> https://mailman.nginx.org/mailman/listinfo/nginx
>
>
_______________________________________________
nginx mailing list
nginx@nginx.org
https://mailman.nginx.org/mailman/listinfo/nginx