Hello Alexander,
I solved the first problem.
But I still can not use chunkin module.
I followed the exact step in your link.

Following is the .configure result:

yzhang@virus:~/nginx-0.8.41$ ./configure
--add-module=./agentzh-chunkin-nginx-module-b0a3ee3
checking for OS
+ Linux 2.6.24-27-server x86_64
checking for C compiler ... found
+ using GNU C compiler
+ gcc version: 4.2.4 (Ubuntu 4.2.4-1ubuntu4)
checking for gcc -pipe switch ... found
checking for gcc builtin atomic operations ... found
checking for gcc variadic macros ... found
checking for C99 variadic macros ... found
checking for unistd.h ... found
checking for inttypes.h ... found
checking for limits.h ... found
checking for sys/filio.h ... not found
checking for sys/param.h ... found
checking for sys/mount.h ... found
checking for sys/statvfs.h ... found
checking for crypt.h ... found
checking for Linux specific features
checking for epoll ... found
checking for sendfile() ... found
checking for sendfile64() ... found
checking for sys/prctl.h ... found
checking for prctl(PR_SET_DUMPABLE) ... found
checking for sched_setaffinity() ... found
checking for crypt_r() ... found
checking for sys/vfs.h ... found
checking for nobody group ... not found
checking for nogroup group ... found
checking for poll() ... found
checking for /dev/poll ... not found
checking for kqueue ... not found
checking for crypt() ... not found
checking for crypt() in libcrypt ... found
checking for F_READAHEAD ... not found
checking for posix_fadvise() ... found
checking for O_DIRECT ... found
checking for F_NOCACHE ... not found
checking for directio() ... not found
checking for statfs() ... found
checking for statvfs() ... found
checking for dlopen() ... not found
checking for dlopen() in libdl ... found
checking for sched_yield() ... found
configuring additional modules
adding module in ./agentzh-chunkin-nginx-module-b0a3ee3
+ ngx_http_chunkin_filter_module was configured
checking for PCRE library ... found
checking for system md library ... not found
checking for system md5 library ... not found
checking for OpenSSL md5 crypto library ... found
checking for zlib library ... found
creating objs/Makefile
checking for int size ... 4 bytes
checking for long size ... 8 bytes
checking for long long size ... 8 bytes
checking for void * size ... 8 bytes
checking for uint64_t ... found
checking for sig_atomic_t ... found
checking for sig_atomic_t size ... 4 bytes
checking for socklen_t ... found
checking for in_addr_t ... found
checking for in_port_t ... found
checking for rlim_t ... found
checking for uintptr_t ... uintptr_t found
checking for system endianess ... little endianess
checking for size_t size ... 8 bytes
checking for off_t size ... 8 bytes
checking for time_t size ... 8 bytes
checking for setproctitle() ... not found
checking for pread() ... found
checking for pwrite() ... found
checking for strerror_r() ... found but is not working
checking for gnu style strerror_r() ... found
checking for sys_errlist[] ... found
checking for localtime_r() ... found
checking for posix_memalign() ... found
checking for memalign() ... found
checking for mmap(MAP_ANON|MAP_SHARED) ... found
checking for mmap("/dev/zero", MAP_SHARED) ... found
checking for System V shared memory ... found
checking for struct msghdr.msg_control ... found
checking for ioctl(FIONBIO) ... found
checking for struct tm.tm_gmtoff ... found
checking for struct dirent.d_namlen ... not found
checking for struct dirent.d_type ... found

Configuration summary
+ using system PCRE library
+ OpenSSL library is not used
+ md5: using system crypto library
+ sha1 library is not used
+ using system zlib library

nginx path prefix: "/usr/local/nginx"
nginx binary file: "/usr/local/nginx/sbin/nginx"
nginx configuration prefix: "/usr/local/nginx/conf"
nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
nginx pid file: "/usr/local/nginx/logs/nginx.pid"
nginx error log file: "/usr/local/nginx/logs/error.log"
nginx http access log file: "/usr/local/nginx/logs/access.log"
nginx http client request body temporary files: "client_body_temp"
nginx http proxy temporary files: "proxy_temp"
nginx http fastcgi temporary files: "fastcgi_temp"
nginx http uwsgi temporary files: "uwsgi_temp"


Thank you so much.
Yanxin

On Thu, Mar 24, 2011 at 1:25 PM, <nginx-request@nginx.org> wrote:

> Send nginx mailing list submissions to
> nginx@nginx.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://nginx.org/mailman/listinfo/nginx
> or, via email, send a message with subject or body 'help' to
> nginx-request@nginx.org
>
> You can reach the person managing the list at
> nginx-owner@nginx.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of nginx digest..."
>
>
> Today's Topics:
>
> 1. Re: What's fastcgi_param scope (Maxim Dounin)
> 2. Re: .htaccess to nginx, how to make wp-minify work? (kaspars)
> 3. Re: What's fastcgi_param scope (Jakub Zalas)
> 4. Re: upload module help (vetri)
> 5. Re: HTTPS - NGINX with Passenger webservers behind F5 load
> balancer (Jarek Zmudzinski)
> 6. Re: HTTPS - NGINX with Passenger webservers behind F5 load
> balancer (Vitaly Tskhovrebov)
> 7. problem in first usage of nginx (Yanxin Zhang)
> 8. Re: problem in first usage of nginx (Ivan)
> 9. Re: problem in first usage of nginx (Alexander Kunz)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 24 Mar 2011 12:24:16 +0300
> From: Maxim Dounin <mdounin@mdounin.ru>
> To: nginx@nginx.org
> Subject: Re: What's fastcgi_param scope
> Message-ID: <20110324092416.GV99496@mdounin.ru>
> Content-Type: text/plain; charset=us-ascii
>
> Hello!
>
> On Wed, Mar 23, 2011 at 04:34:38PM -0700, Jakub Zalas wrote:
>
> > Hi,
> >
> > I'm experiencing odd behavior of fastcgi_param.
> >
> > Based on the URL I'd like to pass additional parameters to PHP.
> >
> > For example:
> >
> > location ~ "^/foo/bar$" {
>
> Just a side note: use "location = /foo/bar" instead.
>
> > # this is not passed to fastcgi and not acesible via $_SERVER
> > fastcgi_param _ROUTING__route foo;
> > fastcgi_index app.php;
>
> Just a side note: fastcgi_index doesn't make sense here at all.
>
> > rewrite ^(.*) /app.php last;
> > }
>
> As soon as you did internal redirect (with rewrite) -
> configuration in this location no longer applies. Instead
> configuration in destination location will be used.
>
> > # standard PHP stuff
> > location ~ \.php {
> > set $script $uri;
> > set $path_info "";
> > if ($uri ~ "^(.+\.php)(/.*)") {
> > set $script $1;
> > set $path_info $2;
> > }
> > fastcgi_pass 127.0.0.1:9000;
> > include /etc/nginx/fastcgi_params;
> > fastcgi_param SCRIPT_FILENAME /var/www/$host/web$script;
> > fastcgi_param PATH_INFO $path_info;
> > fastcgi_param SCRIPT_NAME $script;
> > }
>
> ... and this one has no "fastcgi_param _ROUTING__route" set.
>
> > I also tried nesting location but the result is the same.
> > fastcgi_param defined in nested location block is not passed to PHP.
> >
> > Could anyone explain me why it works this way?
>
> See above. Solution is to write explicitly what you want to
> happen instead of using internal redirects, i.e. something like
> this:
>
> location = /foo/bar {
> fastcgi_pass 127.0.0.1:9000;
> include /etc/nginx/fastcgi_params;
> fastcgi_param SCRIPT_FILENAME /var/www/$host/web/app.php;
> fastcgi_param _ROUTING__route foo;
> ...
> }
>
> Maxim Dounin
>
> p.s. The only thing which survives internal redirect is variables.
> Theoretically you may rewrite your config to set some variables
> before rewrite and then use appropriate fastcgi_param in .php
> location. But it's not going to scale well and not recommended.
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 24 Mar 2011 05:31:35 -0400
> From: "kaspars" <nginx-forum@nginx.us>
> To: nginx@nginx.org
> Subject: Re: .htaccess to nginx, how to make wp-minify work?
> Message-ID:
> <
> c7e82d92ec6eaaf22e18941a4385fbd8.NginxMailingListEnglish@forum.nginx.org>
>
> Content-Type: text/plain; charset=UTF-8
>
> If your WordPress installation works, WP Minify does too! There is no
> need for special rewrites.
>
> Posted at Nginx Forum:
> http://forum.nginx.org/read.php?2,185233,185351#msg-185351
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 24 Mar 2011 03:22:56 -0700 (PDT)
> From: Jakub Zalas <jzalas@gmail.com>
> To: nginx@sysoev.ru
> Subject: Re: What's fastcgi_param scope
> Message-ID:
> <87e0ddd5-3593-4c8c-878e-92e20de1b737@k7g2000yqj.googlegroups.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
>
>
> On Mar 24, 10:24?am, Maxim Dounin <mdou...@mdounin.ru> wrote:
> > Hello!
> >
> > On Wed, Mar 23, 2011 at 04:34:38PM -0700, Jakub Zalas wrote:
> > > Hi,
> >
> > Just a side note: use "location = /foo/bar" instead.
>
> Actually I need a regexp here. I just simplified my example.
>
> > As soon as you did internal redirect (with rewrite) -
> > configuration in this location no longer applies. ?Instead
> > configuration in destination location will be used.
>
> This explains a lot. Thanks!
>
>
> > See above. ?Solution is to write explicitly what you want to
> > happen instead of using internal redirects, i.e. something like
> > this:
> >
> > ? ? location = /foo/bar {
> > ? ? ? ? fastcgi_pass 127.0.0.1:9000;
> > ? ? ? ? include /etc/nginx/fastcgi_params;
> > ? ? ? ? fastcgi_param SCRIPT_FILENAME /var/www/$host/web/app.php;
> > ? ? ? ? fastcgi_param _ROUTING__route foo;
> > ? ? ? ? ...
> > ? ? }
> >
> > Maxim Dounin
> >
> > p.s. The only thing which survives internal redirect is variables. ?
> > Theoretically you may rewrite your config to set some variables
> > before rewrite and then use appropriate fastcgi_param in .php
> > location. ?But it's not going to scale well and not recommended.
>
> Thank you. Your suggestions helped me a lot.
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 24 Mar 2011 08:10:03 -0400
> From: "vetri" <nginx-forum@nginx.us>
> To: nginx@nginx.org
> Subject: Re: upload module help
> Message-ID:
> <
> 502dbed122fac8937be4b0466db03dc4.NginxMailingListEnglish@forum.nginx.org>
>
> Content-Type: text/plain; charset=UTF-8
>
> mr alexander,
>
> i am already using form to to upload files. my doubt is why its not
> saving the file in uploaded file name.it is saving the file in number
> form like this 0040353221 .i dont know why its happening and one more
> question how to parse header using nginx configuration ?
>
> thanks for the reply
>
> Posted at Nginx Forum:
> http://forum.nginx.org/read.php?2,185057,185375#msg-185375
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 24 Mar 2011 13:25:10 +0100
> From: Jarek Zmudzinski <lists@ruby-forum.com>
> To: nginx@nginx.org
> Subject: Re: HTTPS - NGINX with Passenger webservers behind F5 load
> balancer
> Message-ID: <07139f4e5d84597f445649d65126d7fb@ruby-forum.com>
> Content-Type: text/plain; charset=UTF-8
>
> Jarek Zmudzinski wrote in post #986664:
> > What I would like is to NGINX listen to https:// on port 80 this way any
> > https request to F5 LB could still be taken care of by NGINX listening
> > on port 80 without being redirected to http. But I am afraid it's not
> > possible.
>
> Problem solved. It was a F5 configuration issue. NGINX doesn't redirect
> https:// on port 80 to http://.
>
> Thanks.
>
> --
> Posted via http://www.ruby-forum.com/.
>
>
>
> ------------------------------
>
> Message: 6
> Date: Thu, 24 Mar 2011 20:40:17 +0300
> From: Vitaly Tskhovrebov <vt@chgk.info>
> To: nginx@nginx.org
> Subject: Re: HTTPS - NGINX with Passenger webservers behind F5 load
> balancer
> Message-ID: <4D8B8201.9000009@chgk.info>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Thanks for your follow up.
>
> --
> Regards, Vitaly Tskhovrebov
> System Administrator
> U.S. +1 (206) 905-9939
> Russia +7 911 094-2035
>
>
>
> ------------------------------
>
> Message: 7
> Date: Thu, 24 Mar 2011 13:03:36 -0700
> From: Yanxin Zhang <zhynxn@gmail.com>
> To: nginx@nginx.org
> Subject: problem in first usage of nginx
> Message-ID:
> <AANLkTinRmkR1taDHSMugJUjhF63kBDZ3+40K8u-_ebhm@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hello,
> I have several questions about using NginX.
>
> 1)
> After I first install nginx-0.8.41 in Ubuntu 8.04 system, with the default
> .conf file.
> I start nginx with 127.0.0.1:8000, however, I can not see the default
> webpage. The browser can not connect to server.
> Could anyone help me to figure it out?
>
> 2)
> I am following the instructions in
> http://wiki.nginx.org/HttpChunkinModule
>
> to configure nginx.
> when I start nginx, I encounter the error:
> [emerg]: unknown directive "chunkin" in ./conf/nginx.conf:36
>
> The line is
> 35 server {
> 36 chunkin on;
> 37 listen 127.0.0.1:8000;
>
>
> Thanks,
> Yanxin
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://nginx.org/pipermail/nginx/attachments/20110324/cff6ff28/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 8
> Date: Thu, 24 Mar 2011 23:23:29 +0300
> From: Ivan <bdfy@mail.ru>
> To: nginx@nginx.org
> Subject: Re: problem in first usage of nginx
> Message-ID: <E1Q2r45-0001d2-00.bdfy-mail-ru@f238.mail.ru>
> Content-Type: text/plain; charset="koi8-r"
>
> (http://wiki.nginx.org/HttpChunkinModule)
> http://wiki.nginx.org/HttpChunkinModule (
> http://wiki.nginx.org/HttpChunkinModule)
> This module is not distributed with the Nginx source. See the installation
> instructions (http://wiki.nginx.org/HttpChunkinModule#Installation) .
>
>
> Thu, 24 Mar 2011 13:03:36 -0700 ?????? ?? Yanxin Zhang <zhynxn@gmail.com>:
>
> Hello, I have several questions about using NginX.
> 1) After I first install nginx-0.8.41 in Ubuntu 8.04 system, with the
> default .conf file. I start nginx with 127.0.0.1:8000, however, I can not
> see the default webpage. The browser can not connect to server. Could anyone
> help me to figure it out?
> 2)
> I am following the instructions in (
> http://wiki.nginx.org/HttpChunkinModule)
> http://wiki.nginx.org/HttpChunkinModule (
> http://wiki.nginx.org/HttpChunkinModule)
> to configure nginx. when I start nginx, I encounter the error: [emerg]:
> unknown directive "chunkin" in ./conf/nginx.conf:36
> The line is 35 server { 36 chunkin on; 37 listen
> 127.0.0.1:8000;
>
> Thanks,Yanxin
>
>
> _______________________________________________
> nginx mailing list
> nginx@nginx.org (sentmsg?compose&amp;To=nginx@nginx.org)
> (http://nginx.org/mailman/listinfo/nginx) (
> http://nginx.org/mailman/listinfo/nginx)
> http://nginx.org/mailman/listinfo/nginx (
> http://nginx.org/mailman/listinfo/nginx)
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://nginx.org/pipermail/nginx/attachments/20110324/c7866067/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 9
> Date: Thu, 24 Mar 2011 21:25:56 +0100
> From: Alexander Kunz <akunz@ntmedia.de>
> To: nginx@nginx.org
> Subject: Re: problem in first usage of nginx
> Message-ID: <4D8BA8D4.9080403@ntmedia.de>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>
>
> Hello Yanxin,
>
> starts nginx if you not set the chunkin on; option?
>
> Chunkin is no build in option, you must build ngnix from source. Use
>
> --add-module=/path/to/chunkin-nginx-module
>
>
> while you configure...Described here:
>
> http://wiki.nginx.org/HttpChunkinModule#Installation
>
> If you already do this, please show us the output from
>
> nginx -V
>
>
> Cheers,
> Alexander
>
>
>
> On 24.03.2011 21:03, Yanxin Zhang wrote:
> > Hello,
> > I have several questions about using NginX.
> >
> > 1)
> > After I first install nginx-0.8.41 in Ubuntu 8.04 system, with the
> > default .conf file.
> > I start nginx with 127.0.0.1:8000 http://127.0.0.1:8000, however, I
> > can not see the default webpage. The browser can not connect to server.
> > Could anyone help me to figure it out?
> >
> > 2)
> > I am following the instructions in
> > http://wiki.nginx.org/HttpChunkinModule
> >
> > to configure nginx.
> > when I start nginx, I encounter the error:
> > [emerg]: unknown directive "chunkin" in ./conf/nginx.conf:36
> >
> > The line is
> > 35 server {
> > 36
> > 37 listen 127.0.0.1:8000 http://127.0.0.1:8000;
> >
> >
> > Thanks,
> > Yanxin
> >
> >
> >
> >
> > _______________________________________________
> > nginx mailing list
> > nginx@nginx.org
> > http://nginx.org/mailman/listinfo/nginx
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://nginx.org/pipermail/nginx/attachments/20110324/e39e9822/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> nginx mailing list
> nginx@nginx.org
> http://nginx.org/mailman/listinfo/nginx
>
>
> End of nginx Digest, Vol 17, Issue 55
> *************************************
>
_______________________________________________
nginx mailing list
nginx@nginx.org
http://nginx.org/mailman/listinfo/nginx