Output of perl -V:

Summary of my perl5 (revision 5 version 10 subversion 1) configuration:

Platform:
osname=linux, osvers=2.6.32-44.el6.x86_64,
archname=i386-linux-thread-multi
uname='linux x86-16.phx2.fedoraproject.org 2.6.32-44.el6.x86_64 #1
smp wed jul 7 15:47:50 edt 2010 i686 i686 i386 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom
-fasynchronous-unwind-tables -Dccdlflags=-Wl,--enable-new-dtags
-DDEBUGGING=-g -Dversion=5.10.1 -Dmyhostname=localhost
-Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dprefix=/usr
-Dvendorprefix=/usr -Dsiteprefix=/usr/local
-Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib/perl5
-Dprivlib=/usr/share/perl5 -Dvendorlib=/usr/share/perl5
-Darchlib=/usr/lib/perl5 -Dvendorarch=/usr/lib/perl5
-Dinc_version_list=5.10.0 -Darchname=i386-linux-thread-multi
-Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid
-Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog
-Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005
-Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto
-Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto
-Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto
-Dscriptdir=/usr/bin
-Dotherlibdirs=/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi:/usr/local/lib/perl5/site_perl/5.10.0:/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi:/usr/lib/perl5/vendor_perl:/usr/lib/perl5/site_perl'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing
-pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom
-fasynchronous-unwind-tables',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.4 20100630 (Red Hat 4.4.4-10)',
gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.12.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.12'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef,
ccdlflags='-Wl,--enable-new-dtags -Wl,-rpath,/usr/lib/perl5/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom
-fasynchronous-unwind-tables -L/usr/local/lib'


Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_REENTRANT_API
Built under linux
Compiled at Sep 7 2010 12:15:21
@INC:
/usr/local/lib/perl5
/usr/local/share/perl5
/usr/lib/perl5
/usr/share/perl5
/usr/lib/perl5
/usr/share/perl5
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl
/usr/lib/perl5/site_perl
.
Output of perl -MExtUtils::Embed -e ldopts:

-Wl,--enable-new-dtags -Wl,-rpath,/usr/lib/perl5/CORE -fstack-protector
-L/usr/local/lib -L/usr/lib/perl5/CORE -lperl -lresolv -lnsl -ldl -lm
-lcrypt -lutil -lpthread -lc

Output of nginx -V:

nginx version: nginx/0.8.52
built by gcc 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC)
TLS SNI support enabled
configure arguments: --user=nginx --group=nginx
--prefix=/usr/share/nginx --sbin-path=/usr/sbin/nginx
--conf-path=/etc/nginx/nginx.conf
--error-log-path=/var/log/nginx/error.log
--http-log-path=/var/log/nginx/access.log
--http-client-body-temp-path=/var/lib/nginx/tmp/client_body
--http-proxy-temp-path=/var/lib/nginx/tmp/proxy
--http-fastcgi-temp-path=/var/lib/nginx/tmp/fastcgi
--pid-path=/var/run/nginx.pid --lock-path=/var/lock/subsys/nginx
--with-http_ssl_module --with-http_realip_module
--with-http_addition_module --with-http_sub_module
--with-http_dav_module --with-http_flv_module
--with-http_gzip_static_module --with-http_stub_status_module
--with-http_perl_module --with-mail --with-mail_ssl_module
--with-cc-opt='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom
-fasynchronous-unwind-tables'
--add-module=/root/rpmbuild/BUILD/nginx-0.8.52/nginx-upstream-fair

I'll try recompiling with the --with-ld-opts="-Wl,-E" in a couple of
minutes.

--
omega13a
Owner and Founder of UFT
http://www.fedtrek.com



On 09/28/2010 10:05 AM, Maxim Dounin wrote:
> Hello!
>
> On Tue, Sep 28, 2010 at 12:43:55AM -0700, Brandon Amaro wrote:
>
>
>> On 09/28/2010 12:10 AM, Igor Sysoev wrote:
>>
>>> Changes with nginx 0.8.52 28 Sep 2010
>>>
>>> *) Bugfix: nginx used SSL mode for a listen socket if any listen option
>>> was set; the bug had appeared in 0.8.51.
>>>
>>>
>>>
>> The problem I had with 0.8.51 wasn't solved with 0.8.52. After
>> upgrading I get this message when ever I try to restart nginx:
>>
>> Starting nginx: Can't load '/usr/lib/perl5/auto/nginx/nginx.so' for
>> module nginx: /usr/lib/perl5/auto/nginx/nginx.so: undefined symbol:
>> ngx_http_core_module at /usr/lib/perl5/XSLoader.pm line 70.
>> at /usr/lib/perl5/nginx.pmhttp://nginx.pm line 54
>> Compilation failed in require.
>> BEGIN failed--compilation aborted.
>> [alert]: perl_parse() failed: 255
>>
> This looks like the problem with embedded perl you have enabled.
> For some reason it wasn't able to resolve symbol which should be
> defined in nginx itself.
>
> This may either indicate that your perl installation is somewhat
> screwed up (e.g. missed or out-of-sync something like "perl-dev"
> package as it's common on linux systems) or nginx doesn't play
> well enough while embedding perl.
>
> Could you please show what "perl -V" and "perl -MExtUtils::Embed -e ldopts"
> prints on your system? Showing "nginx -V" output is also good
> idea.
>
> I'm able to reproduce the problem by manually removing -Wl,-E from
> "perl -MExtUtils::Embed -e ldopts" output. Not sure though if
> it's ok for perl to don't report it on systems which generally
> need it. Anyway, you may try adding --with-ld-opts="-Wl,-E" to
> nginx configure to see if it helps.
>
>
>> Though this time it added something about the configuration file
>> test failing...<oO> I'm using Fedora Core 13 and had no problems
>> with nginx 0.8.50 .
>>
> Nothing related changed since 0.8.50. Most likely it's your system
> changes (e.g. perl upgrade) in-between caused the problem.
>
>
>> Here's the Source RPM I made for nginx 0.8.52: http://www.fedtrek.com:81/staff/omega13a/rpms/SRPMS/nginx-0.8.52-1.fc13.omega13a.src.rpm
>>
> I'm in doubt if anybody here will/may help you with your srpm.
> Reproducing the problem with normal configure/make by hand is
> always preferred.
>
> Maxim Dounin
>
> _______________________________________________
> nginx mailing list
> nginx@nginx.org
> http://nginx.org/mailman/listinfo/nginx
>
>

_______________________________________________
nginx mailing list
nginx@nginx.org
http://nginx.org/mailman/listinfo/nginx