On Fri, Sep 18, 2009 at 10:25:14AM +0300, Andrew Sitnikov wrote: > Hello Nginx-ru, > > http { > include /etc/nginx/mime.types; > default_type application/octet-stream; > > sendfile on; > gzip on; > > server { > listen 8000; > > satisfy any; > allow 1.2.3.4/32; > deny all; >by Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 06:42:53PM +0400, J Channel wrote: > > В 0.8.11 появился счётчик ссылок на объект запроса, который не даёт удалить > > объект запроса преждевременно. Большое число состояний > > > > 461 CLOSED > > 1405 CLOSE_WAIT > > > > каby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 08:35:45PM +0400, Andrey Y. Ostanovsky wrote: > Igor Sysoev пишет: > > On Thu, Sep 17, 2009 at 03:57:06PM +0400, Andrey Y. Ostanovsky wrote > >> Проблема решилась принудительным прописыванием root в локейшене. Похоже, > >> это болезнь. :( > >> > >> locatiby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 05:22:55PM +0300, Володимир Костирко wrote: > Igor Sysoev написав(ла): > >>>># nginx -t > >>>>: SSL_CTX_set_tlsext_servername_callback() failed (SSL:) > >>>>configuration file /usr/local/etc/nginx/nginx.conf test failed > >>>> > >>>>Кусок конфига: > >&gby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 04:04:06PM +0400, Igor Sysoev wrote: > On Thu, Sep 17, 2009 at 02:59:21PM +0400, Maxim Dounin wrote: > > > Hello! > > > > On Thu, Sep 17, 2009 at 09:11:02AM +0500, Одинцов Павел wrote: > > > > > Доброе утро! > > > > > > Снова воспроизвелось на 0.6.38 и очень краby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 03:57:06PM +0400, Andrey Y. Ostanovsky wrote: > Проблема решилась принудительным прописыванием root в локейшене. Похоже, > это болезнь. :( > > location = /favicon.ico { > root $doc_root; > try_files /favicon.ico @fav2icon; > # access_log off; > } А наслby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 06:22:09PM +0500, Одинцов Павел wrote: > Добрый вечер! > > Так полагаю, nginx после лечения этих проблем будет корректно себя > вести, если у конфига изменился размер, но будут проблемы, если он не > изменился по разby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 02:52:20PM +0300, Alex Vorona wrote: > 17.09.2009 14:22, Одинцов Павел wrote: > >Добрый вечер! > > > >Да, такое было вполне возможно, т.к. клиентские настройки сразу > >вливаются в конфиг. Но, к сожалению, правильно переписываby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 02:59:21PM +0400, Maxim Dounin wrote: > Hello! > > On Thu, Sep 17, 2009 at 09:11:02AM +0500, Одинцов Павел wrote: > > > Доброе утро! > > > > Снова воспроизвелось на 0.6.38 и очень красиво воспроизвелось :) > > [...] > > > > --- SIGHUP (Hangup) @ 0 (0)by Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 02:40:23PM +0400, Maxim Dounin wrote: > Hello! > > On Wed, Sep 16, 2009 at 09:24:33AM -0700, Matthew Dempsky wrote: > > > On Wed, Sep 16, 2009 at 3:35 AM, Maxim Dounin <mdounin@mdounin.ru> wrote: > > > Patch looks correct for me. It looks a bit fragile though, > > > probably we need a bit more bulletproof code here. > >by Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 06:25:42PM +0800, 191919 wrote: > Just a suggestion: gzip module waits for gzip_min_length bytes, if there is > enough data, it starts compressing. There are two modules that send response header only after they processed whole response. However, now I'm not ready to modify the gzip filter: there is already undocumented and buggy postpone_gzipping directive that posby Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 03:56:20AM -0400, machineatube wrote: > here is my conf file , the nginx version is 0.7.36 > I just used the default config. > > > worker_processes 1; > > events { > worker_connections 1024; > } > > > http { > include mime.types; > default_type application/octet-stream; > > > > sendfileby Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 06:11:53PM +0800, 191919 wrote: > Will nginx support using ssi + gzip? nginx supports ssi+gzip. However, gzip_min_length does not work in this case. > 2009/9/17 Igor Sysoev <is@rambler-co.ru> > > > On Thu, Sep 17, 2009 at 05:51:33PM +0800, 191919 wrote: > > > > > Hi there, > > > > > > I encountered a problem when usiby Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 05:51:33PM +0800, 191919 wrote: > Hi there, > > I encountered a problem when using gzip_min_length with upstream + ssi: > > ssi on; > gzip_min_length 1024; > upstream fastcgi_backends > { > server unix:/tmp/nx-fastcgi.sock.00; > } > > I wrote a PHP script as: > > <? > header('Content-Length: 3'); > echo '123'; > ?by Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 01:47:03AM +0000, Matt wrote: > I have found that proxy_set_header directives in the http section > works in version 0.6.32 but not in 0.7.62, instead I have to place > them under the location context. > > The specific directives I am using are: > > proxy_set_header Accept-Encoding ""; > proxy_set_header User-Agent "by Igor Sysoev - Nginx Mailing List - English
On Wed, Sep 16, 2009 at 08:40:30PM +0400, Artemiev Igor wrote: > On Wed, Sep 16, 2009 at 07:19:10PM +0400, Igor Sysoev wrote: > > On Wed, Sep 16, 2009 at 06:58:19PM +0400, J Channel wrote: > > > График в аттаче. Сразу после обновления в 12 часов дня вчера начало рости > > > число Writing соединенийby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 11:46:38AM +0400, J Channel wrote: > 16 сентября 2009 г. 19:19 пользователь Igor Sysoev <is@rambler-co.ru>написал: > > > On Wed, Sep 16, 2009 at 06:58:19PM +0400, J Channel wrote: > > > > > > Какая версия была до этого ? > > 0.8.7 Какие сторонние модули испby Igor Sysoev - Nginx Mailing List - Russian
On Wed, Sep 16, 2009 at 07:25:14PM +0400, AleXXX V. NovikoFF wrote: > Скорее всего воркеры падают. У меня такая же беда. В логе куча сегфолтов. Это надо лечить. > Wed, 16 Sep 2009 18:58:19 +0400 > J Channel <jchannelx@gmail.com> писал(а): > > > График в аттаче. Сразу послby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 09:53:47AM +0300, Володимир Костирко wrote: > Igor Sysoev написав(ла): > >># nginx -t > >>: SSL_CTX_set_tlsext_servername_callback() failed (SSL:) > >>configuration file /usr/local/etc/nginx/nginx.conf test failed > >> > >>Кусок конфига: > >> ssl on; > >> ssl_protoby Igor Sysoev - Nginx Mailing List - Russian
On Thu, Sep 17, 2009 at 08:08:14AM +0300, Volodymyr Kostyrko wrote: > # nginx -t > : SSL_CTX_set_tlsext_servername_callback() failed (SSL:) > configuration file /usr/local/etc/nginx/nginx.conf test failed > > Кусок конфига: > ssl on; > ssl_protocols SSLv3 TLSv1; > ssl_prefer_server_ciphers on; > ssl_ciphers AES128-SHA:AES256-SHA:RC4-SHA:DES-by Igor Sysoev - Nginx Mailing List - Russian
On Wed, Sep 16, 2009 at 09:11:08PM -0700, Kevin Castiglione wrote: > hi > i have the nginx config below, and the fascgi backend takes lot of time to > process the request. this is expected. but nginx returns error before it is > over: > > upstream timed out (145: Connection timed out) while reading response > header from upstream, client: X.X.X.119, server: YYY.com, requestby Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 12:36:07AM -0400, zhijianpeng wrote: > Does the VU#180065 relate with merge_slashes directive? > what is the meanings of merge_slashes directive? > > http://sysoev.ru/nginx/patch.180065.txt No. However, "merge_slashes off" is really danger setting and you should understand what you are doing: instead of simple location /scripts/ { you haveby Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 03:02:21AM +0500, Ziyad Saeed wrote: > The php framework flow3 by typo3 uses environment variables for certain > things. It looks them up in the _SERVER global variables list. If you use FastCGI, then something like this: fastcgi_param _SERVER $domain; > 2009/9/16 Igor Sysoev <is@rambler-co.ru> > > > On Tue, Sep 15, 2009 at 09:24:55PM +0500by Igor Sysoev - Nginx Mailing List - English
On Thu, Sep 17, 2009 at 02:59:19AM +0500, Ziyad Saeed wrote: > so Igor should i use relative or absolute path for script_filename and root This is depends on your needs. BTW, $script_filename is used in path for FastCGI process and 1) it may be native Win32 binary, 2) it may be Cygwin binary using own pathes, 3) it may be even on another host, and the host may be Unix one. > 2009/9/16 Igby Igor Sysoev - Nginx Mailing List - English
On Wed, Sep 16, 2009 at 11:15:42PM +0400, Nikolay Grebnev wrote: > Добрый день. > > Вопрос - требуется ли патч или апдейт для nginx на который прокситуются > запросы от другого nginx? > У меня просто имеется куча внутренних серверов с запущенными наby Igor Sysoev - Nginx Mailing List - Russian
On Wed, Sep 16, 2009 at 12:16:55PM -0400, xmichielx wrote: > Hi Igor, > > I got this problem with the repostiroy ubuntu 8.04 is offering me. > I used the old 0.5.* version but it is lacking a lot of features..so then I installed the backported nginx version but that is lacking the enable-tlsext. > How can I find out if the old debian ubuntu 8.04 hardy package is using the enable-tby Igor Sysoev - Nginx Mailing List - English
On Wed, Sep 16, 2009 at 09:22:25PM +0500, Одинцов Павел wrote: > Добрый вечер! > > Кстати, а если собрать с --with-debug и активировать отладочный лог > error_log /path/to/debug.log debug, то это поможет выяснить куда > девается память или нет? Поможет, но воby Igor Sysoev - Nginx Mailing List - Russian
On Wed, Sep 16, 2009 at 06:30:12PM +0300, F.M.D. wrote: > обновился до последней версии 8-й линейки, перестал работать nginx_status Как именно ? -- Игорь Сысоев http://sysoev.ruby Igor Sysoev - Nginx Mailing List - Russian
On Wed, Sep 16, 2009 at 10:52:52AM -0400, xmichielx wrote: > Hi, > > I am having problems to use Nginx with the openssl version Ubuntu 8.04 server shipped. > See: https://bugs.launchpad.net/ubuntu/+source/nginx/+bug/395637 > I use the Nginx backported version: nginx_0.6.34-2ubuntu1~intrepid1_i386.deb (the 0.5.3 default version is too old on Ubuntu therfor I use the backports for nby Igor Sysoev - Nginx Mailing List - English
On Wed, Sep 16, 2009 at 07:06:15PM +0400, nginx@rufox.ru wrote: > После обновления с версии 0.7.59 до 0.7.62 при перезапуске nginx стал > появляться вот такой алерт > > : setsockopt(SO_ACCEPTFILTER, "httpready") for 0.0.0.0:80 > failed, ignored (2: No such file or directory) И больше ничегоby Igor Sysoev - Nginx Mailing List - Russian
![]() |
![]() |
![]() |
![]() |
|