hello,

i used php 5.3.0 with fpm-0.5.12 together with supervisord which
requires the process to stay in foreground and not to detach from the
console. this was working with the "--fpm" switch:

/usr/bin/php-cgi --fpm --fpm-config /etc/php5/cgi/php-fpm.conf

but in version 0.6 this does not work anymore, is there an option for
the new php-fpm binary that will prevent the detach?

henrik wrote:
> hello,
>
> i used php 5.3.0 with fpm-0.5.12 together with supervisord which
> requires the process to stay in foreground and not to detach from the
> console. this was working with the "--fpm" switch:
>
> /usr/bin/php-cgi --fpm --fpm-config /etc/php5/cgi/php-fpm.conf
>
> but in version 0.6 this does not work anymore, is there an option for
> the new php-fpm binary that will prevent the detach?

Hello Henrik,

This is what I use for daemontools:

~ $ cat /var/supervise/php-fpm/run
#! /bin/sh -

exec 2>&1
exec /usr/local/bin/php-fpm --fpm-config \
/usr/local/etc/php-fpm/php-fpm.conf


Notice that the binary is now php-fpm and not php-cgi. Make sure to
follow the instructions given by dreamcat4 here:

http://github.com/dreamcat4/php-fpm

Regards

hi juan,

i tested your start script but it also forks into background :-(
i forgot to mention that i am using the integrated install method.
maybe this is the reason, i will try the seperate method and then test
your script again with the new binary.

thanks!

> Hello Henrik,
>
> This is what I use for daemontools:
>
> ~ $ cat /var/supervise/php-fpm/run
> #! /bin/sh -
>
> exec 2>&1
> exec /usr/local/bin/php-fpm --fpm-config \
> /usr/local/etc/php-fpm/php-fpm.conf
>
> Notice that the binary is now php-fpm and not php-cgi. Make sure to
> follow the instructions given by dreamcat4 here:
>
> http://github.com/dreamcat4/php-fpm
>
> Regards

Don't bother,

The reason is there's no daemon mode period. We have seen changes
between 0.5 and 0.6 in the cgi/cgi_main.c. Im not sure exactly why
Andrei decided to take the non-daemon mode out specifically, but it
was with a general re-organisation of the command line options. If you
know C, you could probably put the feature back (as a non-default
switch) in without too much efforts,

Otherwise must roll back to 0.5x.

On Thu, Oct 22, 2009 at 8:27 AM, henrik <henrik.westphal@gmail.com> wrote:
>
> hi juan,
>
> i tested your start script but it also forks into background :-(
> i forgot to mention that i am using the integrated install method.
> maybe this is the reason, i will try the seperate method and then test
> your script again with the new binary.
>
> thanks!
>
>> Hello Henrik,
>>
>> This is what I use for daemontools:
>>
>> ~ $ cat /var/supervise/php-fpm/run
>> #! /bin/sh -
>>
>> exec 2>&1
>> exec /usr/local/bin/php-fpm --fpm-config \
>> /usr/local/etc/php-fpm/php-fpm.conf
>>
>> Notice that the binary is now php-fpm and not php-cgi. Make sure to
>> follow the instructions given by dreamcat4 here:
>>
>> http://github.com/dreamcat4/php-fpm
>>
>> Regards
>

dreamcat four wrote:
> Don't bother,
>
> The reason is there's no daemon mode period. We have seen changes
> between 0.5 and 0.6 in the cgi/cgi_main.c. Im not sure exactly why
> Andrei decided to take the non-daemon mode out specifically, but it
> was with a general re-organisation of the command line options. If you
> know C, you could probably put the feature back (as a non-default
> switch) in without too much efforts,
>
> Otherwise must roll back to 0.5x.

I'm using php-fpm-0.6-5.3.1 and it works OK.

What about the config variable:
<value name="daemonize">yes</value>

Hi,
Im sorry but I have just tried this and get the same result as henrik
did. Using exec doesn't to anything either from a script or on the
command line. Are you sure it might not be something special that
DaemonTools is doing? We expect FPM is forking away to background.
Thats for any 0.6 including 0.6-5.3.1.

Best regards,

dreamcat4
dreamcat4@gmail.com

On Thu, Oct 22, 2009 at 7:05 PM, Juan Fco. Giordana
<juangiordana@gmail.com> wrote:
>
> dreamcat four wrote:
>>
>> Don't bother,
>>
>> The reason is there's no daemon mode period. We have seen changes
>> between 0.5 and 0.6 in the cgi/cgi_main.c. Im not sure exactly why
>> Andrei decided to take the non-daemon mode out specifically, but it
>> was with a general re-organisation of the command line options. If you
>> know C, you could probably put the feature back (as a non-default
>> switch) in without too much efforts,
>>
>> Otherwise must roll back to 0.5x.
>
> I'm using php-fpm-0.6-5.3.1 and it works OK.
>

Ah !
I think we all forgot about that. Problem solved.

On Thu, Oct 22, 2009 at 11:04 PM, steven.hartland
<steven.hartland@multiplay.co.uk> wrote:
>
> What about the config variable:
> <value name="daemonize">yes</value>

On Thu, Oct 22, 2009 at 11:04 PM, steven.hartland
<steven.hartland@multiplay.co.uk> wrote:
>
> What about the config variable:
> <value name="daemonize">yes</value>

Come to think about it, theres several such frequently needed
configuration switches and aren't obvious enough. There should be an
appropriate discussion in the man page. Does anybody here like to use
the supplied man page? It could be improved upon for next release.

dreamcat4
dreamcat4@gmail.com