# HG changeset patch
# User Maxim Dounin <mdounin@mdounin.ru>
# Date 1672497248 -10800
# Sat Dec 31 17:34:08 2022 +0300
# Node ID c215d5cf25732ece1819cf1cd48ebb480bb642c7
# Parent 07b0bee87f32be91a33210bc06973e07c4c1dac9
Added warning about redefinition of listen socket protocol options.

The "listen" directive in the http module can be used multiple times
in different server blocks. Originally, it was supposed to be specified
once with various socket options, and without any parameters in virtual
server blocks. For example:

server { listen 80 backlog=1024; server_name foo; ... }
server { listen 80; server_name bar; ... }
server { listen 80; server_name bazz; ... }

The address part of the syntax ("address[:port]" / "port" / "unix:path")
uniquely identifies the listening socket, and therefore is enough for
name-based virtual servers (to let nginx know that the virtual server
accepts requests on the listening socket in question).

To ensure that listening options do not conflict between virtual servers,
they were allowed only once. For example, the following configuration
will be rejected ("duplicate listen options for 0.0.0.0:80 in ..."):

server { listen 80 backlog=1024; server_name foo; ... }
server { listen 80 backlog=512; server_name bar; ... }

At some point it was, however, noticed, that it is sometimes convenient
to repeat some options for clarity. In nginx 0.8.51 the "ssl" parameter
was allowed to be specified multiple times, e.g.:

server { listen 443 ssl backlog=1024; server_name foo; ... }
server { listen 443 ssl; server_name bar; ... }
server { listen 443 ssl; server_name bazz; ... }

This approach makes configuration more readable, since SSL sockets are
immediately visible in the configuration. If this is not needed, just the
address can still be used.

Later, additional protocol-specific options similar to "ssl" were
introduced, notably "http2" and "proxy_protocol". With these options,
one can write:

server { listen 443 ssl backlog=1024; server_name foo; ... }
server { listen 443 http2; server_name bar; ... }
server { listen 443 proxy_protocol; server_name bazz; ... }

The resulting socket will use ssl, http2, and proxy_protocol, but this
is not really obvious from the configuration.

To ensure such misleading configurations are not allowed, nginx now
warns as long as the "listen" directive is used with options different
from the options previously used if these are potentially confusing.

In particular, the following configurations are allowed:

server { listen 8401 ssl backlog=1024; server_name foo; }
server { listen 8401 ssl; server_name bar; }
server { listen 8401 ssl; server_name bazz; }

server { listen 8402 ssl http2 backlog=1024; server_name foo; }
server { listen 8402 ssl; server_name bar; }
server { listen 8402 ssl; server_name bazz; }

server { listen 8403 ssl; server_name bar; }
server { listen 8403 ssl; server_name bazz; }
server { listen 8403 ssl http2; server_name foo; }

server { listen 8404 ssl http2 backlog=1024; server_name foo; }
server { listen 8404 http2; server_name bar; }
server { listen 8404 http2; server_name bazz; }

server { listen 8405 ssl http2 backlog=1024; server_name foo; }
server { listen 8405 ssl http2; server_name bar; }
server { listen 8405 ssl http2; server_name bazz; }

server { listen 8406 ssl; server_name foo; }
server { listen 8406; server_name bar; }
server { listen 8406; server_name bazz; }

And the following configurations will generate warnings:

server { listen 8501 ssl http2 backlog=1024; server_name foo; }
server { listen 8501 http2; server_name bar; }
server { listen 8501 ssl; server_name bazz; }

server { listen 8502 backlog=1024; server_name foo; }
server { listen 8502 ssl; server_name bar; }

server { listen 8503 ssl; server_name foo; }
server { listen 8503 http2; server_name bar; }

server { listen 8504 ssl; server_name foo; }
server { listen 8504 http2; server_name bar; }
server { listen 8504 proxy_protocol; server_name bazz; }

server { listen 8505 ssl http2 proxy_protocol; server_name foo; }
server { listen 8505 ssl http2; server_name bar; }
server { listen 8505 ssl; server_name bazz; }

server { listen 8506 ssl http2; server_name foo; }
server { listen 8506 ssl; server_name bar; }
server { listen 8506; server_name bazz; }

server { listen 8507 ssl; server_name bar; }
server { listen 8507; server_name bazz; }
server { listen 8507 ssl http2; server_name foo; }

server { listen 8508 ssl; server_name bar; }
server { listen 8508; server_name bazz; }
server { listen 8508 ssl backlog=1024; server_name foo; }

server { listen 8509; server_name bazz; }
server { listen 8509 ssl; server_name bar; }
server { listen 8509 ssl backlog=1024; server_name foo; }

The basic idea is that at most two sets of protocol options are allowed:
the main one (with socket options, if any), and a shorter one, with options
being a subset of the main options, repeated for clarity. As long as the
shorter set of protocol options is used, all listen directives except the
main one should use it.

diff --git a/src/http/ngx_http.c b/src/http/ngx_http.c
--- a/src/http/ngx_http.c
+++ b/src/http/ngx_http.c
@@ -1228,7 +1228,8 @@ static ngx_int_t
ngx_http_add_addresses(ngx_conf_t *cf, ngx_http_core_srv_conf_t *cscf,
ngx_http_conf_port_t *port, ngx_http_listen_opt_t *lsopt)
{
- ngx_uint_t i, default_server, proxy_protocol;
+ ngx_uint_t i, default_server, proxy_protocol,
+ protocols, protocols_prev;
ngx_http_conf_addr_t *addr;
#if (NGX_HTTP_SSL)
ngx_uint_t ssl;
@@ -1264,12 +1265,18 @@ ngx_http_add_addresses(ngx_conf_t *cf, n
default_server = addr[i].opt.default_server;

proxy_protocol = lsopt->proxy_protocol || addr[i].opt.proxy_protocol;
+ protocols = lsopt->proxy_protocol;
+ protocols_prev = addr[i].opt.proxy_protocol;

#if (NGX_HTTP_SSL)
ssl = lsopt->ssl || addr[i].opt.ssl;
+ protocols |= lsopt->ssl << 1;
+ protocols_prev |= addr[i].opt.ssl << 1;
#endif
#if (NGX_HTTP_V2)
http2 = lsopt->http2 || addr[i].opt.http2;
+ protocols |= lsopt->http2 << 2;
+ protocols_prev |= addr[i].opt.http2 << 2;
#endif

if (lsopt->set) {
@@ -1299,6 +1306,55 @@ ngx_http_add_addresses(ngx_conf_t *cf, n
addr[i].default_server = cscf;
}

+ /* check for conflicting protocol options */
+
+ if ((protocols | protocols_prev) != protocols_prev) {
+
+ /* options added */
+
+ if ((addr[i].opt.set && !lsopt->set)
+ || addr[i].protocols_changed
+ || (protocols | protocols_prev) != protocols)
+ {
+ ngx_conf_log_error(NGX_LOG_WARN, cf, 0,
+ "protocol options redefined for %V",
+ &addr[i].opt.addr_text);
+ }
+
+ addr[i].protocols = protocols_prev;
+ addr[i].protocols_set = 1;
+ addr[i].protocols_changed = 1;
+
+ } else if ((protocols_prev | protocols) != protocols) {
+
+ /* options removed */
+
+ if (lsopt->set
+ || (addr[i].protocols_set && protocols != addr[i].protocols))
+ {
+ ngx_conf_log_error(NGX_LOG_WARN, cf, 0,
+ "protocol options redefined for %V",
+ &addr[i].opt.addr_text);
+ }
+
+ addr[i].protocols = protocols;
+ addr[i].protocols_set = 1;
+ addr[i].protocols_changed = 1;
+
+ } else {
+
+ /* the same options */
+
+ if (lsopt->set && addr[i].protocols_changed) {
+ ngx_conf_log_error(NGX_LOG_WARN, cf, 0,
+ "protocol options redefined for %V",
+ &addr[i].opt.addr_text);
+ }
+
+ addr[i].protocols = protocols;
+ addr[i].protocols_set = 1;
+ }
+
addr[i].opt.default_server = default_server;
addr[i].opt.proxy_protocol = proxy_protocol;
#if (NGX_HTTP_SSL)
@@ -1355,6 +1411,9 @@ ngx_http_add_address(ngx_conf_t *cf, ngx
}

addr->opt = *lsopt;
+ addr->protocols = 0;
+ addr->protocols_set = 0;
+ addr->protocols_changed = 0;
addr->hash.buckets = NULL;
addr->hash.size = 0;
addr->wc_head = NULL;
diff --git a/src/http/ngx_http_core_module.h b/src/http/ngx_http_core_module.h
--- a/src/http/ngx_http_core_module.h
+++ b/src/http/ngx_http_core_module.h
@@ -274,6 +274,10 @@ typedef struct {
typedef struct {
ngx_http_listen_opt_t opt;

+ unsigned protocols:3;
+ unsigned protocols_set:1;
+ unsigned protocols_changed:1;
+
ngx_hash_t hash;
ngx_hash_wildcard_t *wc_head;
ngx_hash_wildcard_t *wc_tail;
_______________________________________________
nginx-devel mailing list
nginx-devel@nginx.org
https://mailman.nginx.org/mailman/listinfo/nginx-devel