I don't know what is wrong with your config... I guess your smtp server
does not answer properly.
Is 127.0.0.2:143 really your SMTP-server?
Because port 143 is mostly an IMAP port - but you've specified PROTOCOL
SMTP in the server section.
Anyway I tested your config with my settings (replaced name and
smtp-server, here 192.0.2.222:25) and enabled debug:
+ error_log logs/error-mail.log DEBUG;
mail {
- server_name localhost;
+ server_name EXAMPLE.COM;
....
http {
....
- add_header Auth-Server 127.0.0.2;
- add_header Auth-Port 143;
+ add_header Auth-Server 192.0.2.222;
+ add_header Auth-Port 25;
it works well - I see the test incoming mail (I send to myself via 8025
port) and following output in the log (a lot of irrelevant messages are
removed):
>>>>>>>>>
2020/02/14 11:24:04 [debug] 121280#128244: *1 smtp mail from:"mail
FROM:<test@example.com>"
....
2020/02/14 11:24:04 [debug] 121280#128244: *3 http request line: "GET
/cgi-bin/nginxauth.cgi HTTP/1.0"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http uri:
"/cgi-bin/nginxauth.cgi"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http args: ""
2020/02/14 11:24:04 [debug] 121280#128244: *3 http exten: "cgi"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http process request
header line
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header: "Host:
localhost"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header: "Auth-Method:
none"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header: "Auth-User: "
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header: "Auth-Pass: "
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header:
"Auth-Protocol: smtp"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header:
"Auth-Login-Attempt: 1"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header: "Client-IP:
127.0.0.1"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header: "Client-Host:
[UNAVAILABLE]"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header:
"Auth-SMTP-Helo: myhost.example.com"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header:
"Auth-SMTP-From: mail FROM:<test@example.com>"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header:
"Auth-SMTP-To: rcpt TO:<test@example.com>"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http header done
2020/02/14 11:24:04 [debug] 121280#128244: *3 event timer del: 512:
1127939767
2020/02/14 11:24:04 [debug] 121280#128244: *3 generic phase: 0
2020/02/14 11:24:04 [debug] 121280#128244: *3 rewrite phase: 1
2020/02/14 11:24:04 [debug] 121280#128244: *3 search through nested
static locations of ""
2020/02/14 11:24:04 [debug] 121280#128244: *3 test location:
"/cgi-bin/nginxauth.cgi"
2020/02/14 11:24:04 [debug] 121280#128244: *3 using configuration
"/cgi-bin/nginxauth.cgi"
2020/02/14 11:24:04 [debug] 121280#128244: *3 http cl:-1 max:1048576
2020/02/14 11:24:04 [debug] 121280#128244: *3 rewrite phase: 3
2020/02/14 11:24:04 [debug] 121280#128244: *3 http set discard body
2020/02/14 11:24:04 [debug] 121280#128244: *3 HTTP/1.1 204 No Content
Server: nginx/1.17.4
Date: Fri, 14 Feb 2020 10:24:04 GMT
Connection: close
Auth-Status: OK
Auth-Server: 192.0.2.222
Auth-Port: 25
2020/02/14 11:24:04 [debug] 121280#128244: *3 write new buf t:1 f:0
008AD6A0, pos 008AD6A0, size: 164 file: 0, size: 0
2020/02/14 11:24:04 [debug] 121280#128244: *3 http write filter: l:1 f:0
s:164
2020/02/14 11:24:04 [debug] 121280#128244: *3 http write filter limit 0
2020/02/14 11:24:04 [debug] 121280#128244: *3 WSASend: fd:512, s:164
2020/02/14 11:24:04 [debug] 121280#128244: *3 http write filter 00000000
2020/02/14 11:24:04 [debug] 121280#128244: *3 http finalize request: 0,
"/cgi-bin/nginxauth.cgi?" a:1, c:1
2020/02/14 11:24:04 [debug] 121280#128244: *3 http request count:1 blk:0
2020/02/14 11:24:04 [debug] 121280#128244: *3 http close request
2020/02/14 11:24:04 [debug] 121280#128244: *3 http log handler
2020/02/14 11:24:04 [debug] 121280#128244: *3 free: 008ACC50, unused:
1161
2020/02/14 11:24:04 [debug] 121280#128244: *3 close http connection: 512
2020/02/14 11:24:04 [debug] 121280#128244: *3 reusable connection: 0
2020/02/14 11:24:04 [debug] 121280#128244: *3 free: 008AC848
2020/02/14 11:24:04 [debug] 121280#128244: *3 free: 0039FDE0, unused: 28
2020/02/14 11:24:04 [debug] 121280#128244: worker cycle
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http read
handler
2020/02/14 11:24:04 [debug] 121280#128244: *1 WSARecv: fd:496 rc:0 164
of 1024
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http process
status line
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http process
headers
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http header:
"Server: nginx/1.17.4"
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http header:
"Date: Fri, 14 Feb 2020 10:24:04 GMT"
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http header:
"Connection: close"
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http header:
"Auth-Status: OK"
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http header:
"Auth-Server: 192.0.2.222"
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http header:
"Auth-Port: 25"
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail auth http header done
2020/02/14 11:24:04 [debug] 121280#128244: *1 event timer del: 496:
1127939764
2020/02/14 11:24:04 [debug] 121280#128244: *1 reusable connection: 0
2020/02/14 11:24:04 [debug] 121280#128244: *1 free: 008AC040, unused:
196
2020/02/14 11:24:04 [debug] 121280#128244: *1 stream socket 496
2020/02/14 11:24:04 [debug] 121280#128244: *1 connect to 192.0.2.222:25,
fd:496 #4
2020/02/14 11:24:04 [debug] 121280#128244: *1 event timer add: 496:
60000:1127939769
2020/02/14 11:24:04 [debug] 121280#128244: *1 malloc: 008AC040:4096
2020/02/14 11:24:04 [debug] 121280#128244: worker cycle
2020/02/14 11:24:04 [debug] 121280#128244: *1 post event 00897120
2020/02/14 11:24:04 [debug] 121280#128244: posted event 00897120
2020/02/14 11:24:04 [debug] 121280#128244: *1 delete posted event
00897120
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail proxy dummy handler
2020/02/14 11:24:04 [debug] 121280#128244: worker cycle
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail proxy smtp auth
handler
2020/02/14 11:24:04 [debug] 121280#128244: *1 WSARecv: fd:496 rc:0 22 of
4096
2020/02/14 11:24:04 [debug] 121280#128244: *1 mail proxy send ehlo
2020/02/14 11:24:04 [debug] 121280#128244: *1 malloc: 0039FDE0:256
2020/02/14 11:24:04 [debug] 121280#128244: *1 WSASend: fd:496, 0, 25 of
25
2020/02/14 11:24:04 [debug] 121280#128244: worker cycle
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy smtp auth
handler
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSARecv: fd:496 rc:0 196
of 4096
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy send mail from
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSASend: fd:496, 0, 47 of
47
2020/02/14 11:24:05 [debug] 121280#128244: worker cycle
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy smtp auth
handler
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSARecv: fd:496 rc:0 60 of
4096
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy send rcpt to
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSASend: fd:496, 0, 45 of
45
2020/02/14 11:24:05 [debug] 121280#128244: worker cycle
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy smtp auth
handler
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSARecv: fd:496 rc:0 63 of
4096
2020/02/14 11:24:05 [debug] 121280#128244: *1 event timer add: 492:
86400000:1214280441
2020/02/14 11:24:05 [debug] 121280#128244: *1 event timer del: 496:
1127939769
2020/02/14 11:24:05 [info] 121280#128244: *1 client logged in, client:
127.0.0.1, server: 0.0.0.0:8025
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy handler: 1,
#496 > #492
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSASend: fd:492, 0, 63 of
63
2020/02/14 11:24:05 [debug] 121280#128244: *1 event timer: 492, old:
1214280441, new: 1214280441
2020/02/14 11:24:05 [debug] 121280#128244: worker cycle
2020/02/14 11:24:05 [debug] 121280#128244: *1 post event 008830C8
2020/02/14 11:24:05 [debug] 121280#128244: posted event 008830C8
2020/02/14 11:24:05 [debug] 121280#128244: *1 delete posted event
008830C8
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy handler: 0,
#492 > #496
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSARecv: fd:492 rc:0 6 of
4096
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSASend: fd:496, 0, 6 of 6
2020/02/14 11:24:05 [debug] 121280#128244: *1 event timer: 492, old:
1214280441, new: 1214280441
2020/02/14 11:24:05 [debug] 121280#128244: worker cycle
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy handler: 0,
#496 > #492
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSARecv: fd:496 rc:0 50 of
4096
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSASend: fd:492, 0, 50 of
50
2020/02/14 11:24:05 [debug] 121280#128244: worker cycle
2020/02/14 11:24:05 [debug] 121280#128244: *1 post event 008830C8
2020/02/14 11:24:05 [debug] 121280#128244: posted event 008830C8
2020/02/14 11:24:05 [debug] 121280#128244: *1 delete posted event
008830C8
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy handler: 0,
#492 > #496
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSARecv: fd:492 rc:0 170
of 4096
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSASend: fd:496, 0, 170 of
170
2020/02/14 11:24:05 [debug] 121280#128244: *1 event timer: 492, old:
1214280441, new: 1214280535
2020/02/14 11:24:05 [debug] 121280#128244: worker cycle
2020/02/14 11:24:05 [debug] 121280#128244: *1 mail proxy handler: 0,
#496 > #492
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSARecv: fd:496 rc:0 56 of
4096
2020/02/14 11:24:05 [debug] 121280#128244: *1 WSASend: fd:492, 0, 56 of
56
2020/02/14 11:24:05 [debug] 121280#128244: worker cycle
....
<<<<<<<<<
Regards,
Sergey
13.02.2020 22:45, Yury Shpakov wrote:
> Hi Sergey,
>
> I reconfigured the config file as follows:
>
> === === ===
>
> #user nobody;
> worker_processes 1;
>
> #error_log logs/error.log;
> #error_log logs/error.log notice;
> #error_log logs/error.log info;
>
> #pid logs/nginx.pid;
>
> events {
> worker_connections 1024;
> }
>
> mail {
> server_name localhost;
> auth_http localhost:9000/cgi-bin/nginxauth.cgi;
> # auth_http none;
>
> smtp_auth none;
> # smtp_auth login plain cram-md5;
> # smtp_capabilities "SIZE 10485760" ENHANCEDSTATUSCODES 8BITMIME DSN;
> xclient off;
>
> server {
> listen 8025;
> protocol smtp;
> proxy on;
> proxy_pass_error_message on;
> }
> }
>
> http {
> server {
> listen 9000;
>
> location /cgi-bin/nginxauth.cgi {
> add_header Auth-Status OK;
> add_header Auth-Server 127.0.0.2; # backend ip
> add_header Auth-Port 143; # backend port
> return 204;
> }
> }
> }
> === === ===
>
> And now it's responding on port 9000 as expected:
>
> === === ===
> C:WINDOWSsystem32>curl -H "Auth-Method: plain" -H "Auth-User: user" -H "Auth-Pass: pwd" -H "Auth-Protocol: imap" -H "Auth-Login-Attempt: 1" -i http://127.0.0.1:9000/cgi-bin/nginxauth.cgi
>
> HTTP/1.1 204 No Content
> Server: nginx/1.17.9
> Date: Thu, 13 Feb 2020 21:30:54 GMT
> Connection: keep-alive
> Auth-Status: OK
> Auth-Server: 127.0.0.2 Auth-Port: 143
> === === ===
>
> However I'm still experiencing the same issue (in log file):
>
> === === ===
> 2020/02/13 16:29:24 [notice] 35048#26192: signal process started
>
> 2020/02/13 16:29:34 [error] 31732#22720: *1 WSASend() failed (10057: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied) while in http auth state, client: 127.0.0.1, server: 0.0.0.0:8025 === === ===
>
> Tried under both admin and regular user.
>
> Any further ideas how to get it fixed please?
>
> Thank you,
> Yury
>
> -------------------------
>
> FROM: Sergey Brester <serg.brester@sebres.de>
> SENT: Wednesday, February 12, 2020 1:51 PM
> TO: Yury Shpakov <yshpakov@hotmail.com>
> CC: nginx-devel@nginx.org <nginx-devel@nginx.org>
> SUBJECT: Re: nginx for Windows - WSASend() socket error 10057
>
> I answered inline...
>
> 12.02.2020 18:59, Yury Shpakov wrote:
>
>> Hi Sergey,
>>
>> Thank you for you response.
>>
>> I tried netstat /nabo and I don't see any reference to port 9000 at all.
>> So a problem is to make nginx to listen on port 9000 (as server)?
>> Or nginx is not listening on port 9000 but rather sending requests to port 9000 (as client)?
>
> With setting of `auth_http`, you are defining an URL to the service responsible for authentication (and upstream choice).
> Of course then you should have something that would response to the auth-requests (your own upstream, or some nginx location, or some "foreign" http-server).
>
> See https://docs.nginx.com/nginx/admin-guide/mail-proxy/mail-proxy/ [2] for more examples.
>
>> Maybe it's easier not to use auth_http at all? I was trying to remove it from configuration file but nginx was not happy.
>
> I have my own auth-module so I don't know how it can be solved in stock-nginx without this directive.
>
> Take a look here - https://serverfault.com/questions/594962/nginx-understanding-the-purpose-of-auth-http-imap-proxy [3] - you can use some nginx location (and internal URL to same nginx instance) to specify that.
>
> Anyway it is recommended to use some auth (on nginx side), because it'd preserve the resources of mail-servers, allow you to authenticate email clients with same user/password for all mail-servers (smtp, imap, pop3, etc) as well as the same user/pwd as for some other http-services. And it is used to choose an upstream server (if multiple) for the email processing.
>
>> At this point I don't need any authentication. I was told by my boss to use nginx for load testing of our service sending emails (SMTP client). I've got some SMTP Server and nginx would be used as SMTP proxy because it allows to set up delays.
>
> Well, an auth request to some nginx-location would allow you to set up delays even on authentication phase.
>
>> And take into account that I REMOVED "--with-http_ssl_module" from parameters when I was building nginx.
>>
>> And you advised to download some nginx.exe files but I believe they were built without "--with-mail" parameter (which I need).
>
> Although, it was compiled with "--with-mail" (you can see all parameters in provided GH-link [4])
> But it would not help, because basically your issue seems to be the configuration (not the nginx.exe).
>
> Thank you,
> Yury
>
> -------------------------
>
> FROM: Sergey Brester <serg.brester@sebres.de>
> SENT: Wednesday, February 12, 2020 7:38 AM
> TO: nginx-devel@nginx.org <nginx-devel@nginx.org>
> CC: Yury Shpakov <yshpakov@hotmail.com>
> SUBJECT: Re: nginx for Windows - WSASend() socket error 10057
>
> It looks like your service defined in auth_http doesn't answer (or no listener on 127.0.0.1 port 9000?)...
>
> try netstat (in cmd as admin):
>
> netstat /nabo
> netstat /nabo | grep -A 1 ":9000b"
>
> and check whether the listener on port 9000 is bound to 127.0.0.1 (or it is 0.0.0.0 only?) and it is the process you expect to see there (can be "reserved" by some other windows-service).
>
> additionally try to telnet or curl it:
>
> curl -H "Auth-Method: plain" -H "Auth-User: user" -H "Auth-Pass: pwd" -H "Auth-Protocol: imap" -H "Auth-Login-Attempt: 1" -i http://127.0.0.1:9000/cgi-bin/nginxauth.cgi
>
> if it does not answer, make another attempt by replace 127.0.0.1 with 0.0.0.0 (or a host-name).
>
> If it answers - see whether it is the expected response (some examples of good and bad responses are described in http://nginx.org/en/docs/mail/ngx_mail_auth_http_module.html [5]).
>
> But I guess if WSASend fails, it would probably (unexpected) reject the connection during the send (or even connect) process.
> It can be also invalid (unexpected) content-length in keep-alive connect to auth-upstream - so send but still receive is expected (or vice versa).
>
> Also follow this forum topic addressing similar issue: https://forum.nginx.org/read.php?2,257206,257207#msg-257207 [6]
>
> Anyway it doesn't look to me like an issue of nginx (regardless windows or not), but you can also try some other ready build (for example on my GH [4] - nginx.zip [7], where it works well).
>
> Regards,
> Sergey
>
> 12.02.2020 03:01, Yury Shpakov wrote:
> Hi there,
>
> Trying to make nginx work as SMTP server and/or SMTP proxy. Done everything according to:
> http://nginx.org/en/docs/howto_build_on_win32.html [8]
> But excluded (don't care about SSL at this point so don't want to install/configure Perl now):
> --with-openssl=objs/lib/openssl-master
>
> --with-openssl-opt=no-asm
> --with-http_ssl_module
> And added:
> --with-mail
>
> nmake was successful and nginx.exe was created.
> However nginx.exe keeps failing with the error:
> WSASend() failed (10057: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied) while in http auth state, client: 127.0.0.1, server: 0.0.0.0:8025
> Windows API says the following about this error:
>
> WSAENOTCONN10057
> Socket is not connected.A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using SENDTO [9]) no address was supplied. Any other type of operation might also return this error--for example, SETSOCKOPT [10] setting SO_KEEPALIVE [11] if the connection has been reset.
>
> https://docs.microsoft.com/en-us/windows/win32/winsock/windows-sockets-error-codes-2 [12]
>
> Windows Sockets Error Codes (Winsock2.h) - Win32 apps | Microsoft Docs [12]
> Return code/value Description; WSA_INVALID_HANDLE 6: Specified event object handle is invalid. An application attempts to use an event object, but the specified handle is not valid.
> docs.microsoft.com
>
> Managed to debug your code in VS 2010 a little bit but it's brutal C so it's hard to figure your code out. And this debugger doesn't show you any local variables values.
> Any recommendation for me to make it work?
> Tried to play with config (commenting/uncommenting):
>
> #user nobody;
> worker_processes 1;
> #error_log logs/error.log;
> #error_log logs/error.log notice;
> #error_log logs/error.log info;
> #pid logs/nginx.pid;
> events {
> worker_connections 1024;
> }
> mail {
> server_name localhost;
> auth_http localhost:9000/cgi-bin/nginxauth.cgi;
> # auth_http none;
> smtp_auth none;
> # smtp_auth login plain cram-md5;
> # smtp_capabilities "SIZE 10485760" ENHANCEDSTATUSCODES 8BITMIME DSN;
> xclient off;
> server {
> listen 8025;
> protocol smtp;
> proxy on;
> proxy_pass_error_message on;
> }
> } Tried both under a regular user and under admin. Tried on 25, 1025 and 8025 ports.
> Thank you,
> Yury
>
> _______________________________________________
> nginx-devel mailing list
> nginx-devel@nginx.orghttp://mailman.nginx.org/mailman/listinfo/nginx-devel [1]
Links:
------
[1] http://mailman.nginx.org/mailman/listinfo/nginx-devel
[2] https://docs.nginx.com/nginx/admin-guide/mail-proxy/mail-proxy/
[3]
https://serverfault.com/questions/594962/nginx-understanding-the-purpose-of-auth-http-imap-proxy
[4] https://github.com/sebres/nginx/releases/tag/release-1.13.0
[5] http://nginx.org/en/docs/mail/ngx_mail_auth_http_module.html
[6] https://forum.nginx.org/read.php?2,257206,257207#msg-257207
[7] https://github.com/sebres/nginx/files/2246440/nginx.zip
[8] http://nginx.org/en/docs/howto_build_on_win32.html
[9]
https://docs.microsoft.com/en-us/windows/desktop/api/winsock/nf-winsock-sendto
[10]
https://docs.microsoft.com/en-us/windows/desktop/api/winsock/nf-winsock-setsockopt
[11]
https://docs.microsoft.com/en-us/windows/desktop/winsock/so-keepalive
[12]
https://docs.microsoft.com/en-us/windows/win32/winsock/windows-sockets-error-codes-2_______________________________________________
nginx-devel mailing list
nginx-devel@nginx.org
http://mailman.nginx.org/mailman/listinfo/nginx-devel
