Hi all,
I think I have found a small issue, if we're using proxy_pass to talk to an
origin that doesn't support keep alives.
The origin will return a HTTP header "Connection: close", and terminate the
connection (TCP FIN).
We don't take this into account, and assume there is a keep-alive connection
available.
The next time the connection is used, it won't be part of a valid TCP
stream, and the origin server will send a TCP RST.
This can be simulated with 2 nginx instances, one acting as a reverse proxy
with keep alive connection. And the other using the directive
keepalive_timeout 0; (which will always terminate connections right away).
The patches attached take into account the response of the origin, and
should fix this issue.
Matthieu.
On Mon, Aug 8, 2011 at 2:36 AM, SplitIce <mat999@gmail.com> wrote:
> Oh and I havent been able to reproduce the crash, I tried for a while but
> gave up. if it happens again ill build with debugging and restart howeaver
> so far its been 36hours without issues (under a significant amount of
> traffic)
>
>
> On Mon, Aug 8, 2011 at 7:35 PM, SplitIce <mat999@gmail.com> wrote:
>
>> 50ms per HTTP request (taken from firebug and chrome resource panel) as
>> the time it takes the html to load from request to arrival.
>> 200ms is the time saved by when the http starts transfering to me
>> (allowing other resources to begin downloading before the HTML completes),
>> previously the html only started transfering after the full request was
>> downloaded to the proxy server (due to buffering)
>>
>> HTTP to talk to the backends (between countries)
>>
>> The node has a 30-80ms ping time between the backend and frontend.
>> (Russia->Germany, Sweden->NL, Ukraine->Germany/NL etc)
>>
>> On Mon, Aug 8, 2011 at 7:22 PM, Maxim Dounin <mdounin@mdounin.ru> wrote:
>>
>>> Hello!
>>>
>>> On Mon, Aug 08, 2011 at 02:44:12PM +1000, SplitIce wrote:
>>>
>>> > Been testing this on my servers now for 2 days now, handling
>>> approximately
>>> > 100mbit of constant traffic (3x20mbit, 1x40mbit).
>>> >
>>> > Havent noticed any large bugs, had an initial crash on one of the
>>> > servers however havent been able to replicate. The servers are a
>>> mixture of
>>> > openvz, XEN and one vmware virtualised containers running debian lenny
>>> or
>>> > squeeze,
>>>
>>> By "crash" you mean nginx segfault? If yes, it would be great to
>>> track it down (either to fix problem in keepalive patch or to
>>> prove it's unrelated problem).
>>>
>>> > Speed increases from this module are decent, approximately 50ms from
>>> the
>>> > request time and the HTTP download starts 200ms earler resulting in a
>>> 150ms
>>> > quicker load time on average.
>>>
>>> Sounds cool, but I don't really understand what "50ms from the
>>> request time" and "download starts 200ms earler" actually means.
>>> Could you please elaborate?
>>>
>>> And, BTW, do you use proxy or fastcgi to talk to backends?
>>>
>>> Maxim Dounin
>>>
>>> >
>>> > all in all, seems good.
>>> >
>>> > Thanks for all your hard work Maxim.
>>> >
>>> > On Thu, Aug 4, 2011 at 4:51 PM, Maxim Dounin <mdounin@mdounin.ru>
>>> wrote:
>>> >
>>> > > Hello!
>>> > >
>>> > > On Wed, Aug 03, 2011 at 05:06:56PM -0700, Matthieu Tourne wrote:
>>> > >
>>> > > > Hi,
>>> > > >
>>> > > > I'm trying to use keepalive http connections for proxy_pass
>>> directives
>>> > > > containing variables.
>>> > > > Currently it only works for named upstream blocks.
>>> > > >
>>> > > > I'm wondering what would be the easiest way,
>>> > > > maybe setting peer->get to ngx_http_upstream_get_keepalive_peer and
>>> > > > kp->original_get_peer to ngx_http_upstream_get_round_robin_peer()
>>> towards
>>> > > > the end of ngx_http_create_round_robin_peer().
>>> > > > If I can figure how to set kp->conf to something sane this might
>>> work :)
>>> > > >
>>> > > > Thoughts ?
>>> > >
>>> > > You may try to pick one from upstream's main conf upstreams
>>> > > array (e.g. one from first found upstream with init set to
>>> > > ngx_http_upstream_init_keepalive). Dirty, but should work.
>>> > >
>>> > > Maxim Dounin
>>> > >
>>> > > >
>>> > > > Thank you,
>>> > > > Matthieu.
>>> > > >
>>> > > > On Tue, Aug 2, 2011 at 10:21 PM, SplitIce <mat999@gmail.com>
>>> wrote:
>>> > > >
>>> > > > > Ive been testing this on my localhost and one of my live servers
>>> (http
>>> > > > > backend) for a good week now, I haven't had any issues that I
>>> have
>>> > > noticed
>>> > > > > as of yet.
>>> > > > >
>>> > > > > Servers are Debian Lenny and Debian Squeeze (oldstable, stable)
>>> > > > >
>>> > > > > Hoping it will make it into the developer (1.1.x) branch soon :)
>>> > > > >
>>> > > > >
>>> > > > > On Wed, Aug 3, 2011 at 1:57 PM, liseen <liseen.wan@gmail.com>
>>> wrote:
>>> > > > >
>>> > > > >> Hi
>>> > > > >>
>>> > > > >> Could nginx keepalive work with HealthCheck? Does Maxim Dounin
>>> have
>>> > > a
>>> > > > >> support plan?
>>> > > > >>
>>> > > > >>
>>> > > > >>
>>> > > > >> On Wed, Aug 3, 2011 at 3:09 AM, David Yu <
>>> david.yu.ftw@gmail.com>
>>> > > wrote:
>>> > > > >>
>>> > > > >>>
>>> > > > >>>
>>> > > > >>> On Wed, Aug 3, 2011 at 2:47 AM, Maxim Dounin <
>>> mdounin@mdounin.ru>
>>> > > wrote:
>>> > > > >>>
>>> > > > >>>> Hello!
>>> > > > >>>>
>>> > > > >>>> On Wed, Aug 03, 2011 at 01:53:30AM +0800, David Yu wrote:
>>> > > > >>>>
>>> > > > >>>> > On Wed, Aug 3, 2011 at 1:50 AM, Maxim Dounin <
>>> mdounin@mdounin.ru>
>>> > > > >>>> wrote:
>>> > > > >>>> >
>>> > > > >>>> > > Hello!
>>> > > > >>>> > >
>>> > > > >>>> > > On Wed, Aug 03, 2011 at 01:42:13AM +0800, David Yu wrote:
>>> > > > >>>> > >
>>> > > > >>>> > > > On Wed, Aug 3, 2011 at 1:36 AM, Maxim Dounin <
>>> > > mdounin@mdounin.ru>
>>> > > > >>>> wrote:
>>> > > > >>>> > > >
>>> > > > >>>> > > > > Hello!
>>> > > > >>>> > > > >
>>> > > > >>>> > > > > On Tue, Aug 02, 2011 at 04:24:45PM +0100, António P.
>>> P.
>>> > > Almeida
>>> > > > >>>> wrote:
>>> > > > >>>> > > > >
>>> > > > >>>> > > > > > On 1 Ago 2011 17h07 WEST, mdounin@mdounin.ru wrote:
>>> > > > >>>> > > > > >
>>> > > > >>>> > > > > > > Hello!
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > > JFYI:
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > > Last week I posted patch to nginx-devel@ which
>>> adds
>>> > > > >>>> keepalive
>>> > > > >>>> > > > > > > support to various backends (as with upstream
>>> keepalive
>>> > > > >>>> module),
>>> > > > >>>> > > > > > > including fastcgi and http backends (this in turn
>>> means
>>> > > > >>>> nginx now
>>> > > > >>>> > > > > > > able to talk HTTP/1.1 to backends, in particular
>>> it now
>>> > > > >>>> > > > > > > understands chunked responses). Patch applies to
>>> 1.0.5
>>> > > and
>>> > > > >>>> 1.1.0.
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > > Testing is appreciated.
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > > You may find patch and description here:
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > >
>>> > > > >>>> > >
>>> > > > >>>>
>>> > > http://mailman.nginx.org/pipermail/nginx-devel/2011-July/001057.html
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > > Patch itself may be downloaded here:
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > >
>>> http://nginx.org/patches/patch-nginx-keepalive-full.txt
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > > Upstream keepalive module may be downloaded here:
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > > > http://mdounin.ru/hg/ngx_http_upstream_keepalive/
>>> > > > >>>> > > > > > >
>>> > > > >>>>
>>> http://mdounin.ru/files/ngx_http_upstream_keepalive-0.4.tar.gz
>>> > > > >>>> > > > > > >
>>> > > > >>>> > > > > >
>>> > > > >>>> > > > > > So *either* we use the patch or use the module.
>>> Correct?
>>> > > > >>>> > > > >
>>> > > > >>>> > > > > No, to keep backend connections alive you need module
>>> *and*
>>> > > > >>>> patch.
>>> > > > >>>> > > > > Patch provides foundation in nginx core for module to
>>> work
>>> > > with
>>> > > > >>>> > > > > fastcgi and http.
>>> > > > >>>> > > > >
>>> > > > >>>> > > > With a custom nginx upstream binary protocol, I believe
>>> > > > >>>> multiplexing will
>>> > > > >>>> > > > now be possible?
>>> > > > >>>> > >
>>> > > > >>>> > > ENOPARSE, sorry.
>>> > > > >>>> > >
>>> > > > >>>> > After some googling ...
>>> > > > >>>> > ENOPARSE is a nerdy term. It is one of the standard C
>>> library
>>> > > error
>>> > > > >>>> codes
>>> > > > >>>> > that can be set in the global variable "errno" and stands
>>> for
>>> > > Error No
>>> > > > >>>> > Parse. Since you didn't get it, I can thus conclude that
>>> unlike me
>>> > > you
>>> > > > >>>> are probably
>>> > > > >>>> > a normal, well adjusted human being ;-)
>>> > > > >>>>
>>> > > > >>>> Actually, this definition isn't true: there is no such error
>>> code,
>>> > > > >>>> it's rather imitation. The fact that author of definition
>>> claims
>>> > > > >>>> it's real error indicate that unlike me, he is normal, well
>>> > > > >>>> adjusted human being. ;)
>>> > > > >>>>
>>> > > > >>>> > Now I get it. Well adjusted I am.
>>> > > > >>>>
>>> > > > >>>> Now you may try to finally explain what you mean to ask in
>>> your
>>> > > > >>>> original message. Please keep in mind that your are talking
>>> to
>>> > > > >>>> somebody far from being normal and well adjusted. ;)
>>> > > > >>>>
>>> > > > >>>> Maxim Dounin
>>> > > > >>>>
>>> > > > >>>> p.s. Actually, I assume you are talking about fastcgi
>>> > > > >>>> multiplexing.
>>> > > > >>>
>>> > > > >>> Nope not fastcgi multiplexing. Multiplexing over a
>>> custom/efficient
>>> > > > >>> nginx binary protocol.
>>> > > > >>> Where requests sent to upstream include a unique id w/c the
>>> upstream
>>> > > will
>>> > > > >>> also send on response.
>>> > > > >>> This allows for asychronous, out-of-bands, messaging.
>>> > > > >>> I believe this is what mongrel2 is trying to do now ... though
>>> as an
>>> > > http
>>> > > > >>> server, it is nowhere near as robust/stable as nginx.
>>> > > > >>> If nginx implements this (considering nginx already has a lot
>>> of
>>> > > market
>>> > > > >>> share), it certainly would bring more developers/users in
>>> (especially
>>> > > the
>>> > > > >>> ones needing async, out-of-bands request handling)
>>> > > > >>>
>>> > > > >>>
>>> > > > >>> Short answer is: no, it's still not possible.
>>> > > > >>>>
>>> > > > >>>> _______________________________________________
>>> > > > >>>> nginx mailing list
>>> > > > >>>> nginx@nginx.org
>>> > > > >>>> http://mailman.nginx.org/mailman/listinfo/nginx
>>> > > > >>>>
>>> > > > >>>
>>> > > > >>>
>>> > > > >>>
>>> > > > >>> --
>>> > > > >>> When the cat is away, the mouse is alone.
>>> > > > >>> - David Yu
>>> > > > >>>
>>> > > > >>> _______________________________________________
>>> > > > >>> nginx mailing list
>>> > > > >>> nginx@nginx.org
>>> > > > >>> http://mailman.nginx.org/mailman/listinfo/nginx
>>> > > > >>>
>>> > > > >>>
>>> > > > >>
>>> > > > >> _______________________________________________
>>> > > > >> nginx mailing list
>>> > > > >> nginx@nginx.org
>>> > > > >> http://mailman.nginx.org/mailman/listinfo/nginx
>>> > > > >>
>>> > > > >>
>>> > > > >
>>> > > > >
>>> > > > > --
>>> > > > > Warez Scene http://thewarezscene.org Free Rapidshare
>>> Downloads<
>>> > > http://www.nexusddl.com>
>>> > > > >
>>> > > > >
>>> > > > > _______________________________________________
>>> > > > > nginx mailing list
>>> > > > > nginx@nginx.org
>>> > > > > http://mailman.nginx.org/mailman/listinfo/nginx
>>> > > > >
>>> > > > >
>>> > >
>>> > > > _______________________________________________
>>> > > > nginx mailing list
>>> > > > nginx@nginx.org
>>> > > > http://mailman.nginx.org/mailman/listinfo/nginx
>>> > >
>>> > > _______________________________________________
>>> > > nginx mailing list
>>> > > nginx@nginx.org
>>> > > http://mailman.nginx.org/mailman/listinfo/nginx
>>> > >
>>> >
>>> >
>>> >
>>> > --
>>> > Warez Scene http://thewarezscene.org Free Rapidshare
>>> > Downloadshttp://www.nexusddl.com
>>>
>>> > _______________________________________________
>>> > nginx mailing list
>>> > nginx@nginx.org
>>> > http://mailman.nginx.org/mailman/listinfo/nginx
>>>
>>> _______________________________________________
>>> nginx mailing list
>>> nginx@nginx.org
>>> http://mailman.nginx.org/mailman/listinfo/nginx
>>>
>>
>>
>>
>> --
>> Warez Scene http://thewarezscene.org Free Rapidshare Downloadshttp://www.nexusddl.com
>>
>>
>
>
> --
> Warez Scene http://thewarezscene.org Free Rapidshare Downloadshttp://www.nexusddl.com
>
>
> _______________________________________________
> nginx mailing list
> nginx@nginx.org
> http://mailman.nginx.org/mailman/listinfo/nginx
>
>
_______________________________________________
nginx mailing list
nginx@nginx.org
http://mailman.nginx.org/mailman/listinfo/nginx