execute bellow commands to check that it is runnung properly or not:

ps axu | grep php
or
netstat -napt | grep LIST | grep :9000



============================================


On Fri, Jul 12, 2013 at 9:21 PM, dumorim <nginx-forum@nginx.us> wrote:

> /etc/php5/fpm/pool.d www.conf
>
> ; Start a new pool named 'www'.
> ; the variable $pool can we used in any directive and will be replaced by
> the
> ; pool name ('www' here)
> [www]
>
> ; Per pool prefix
> ; It only applies on the following directives:
> ; - 'slowlog'
> ; - 'listen' (unixsocket)
> ; - 'chroot'
> ; - 'chdir'
> ; - 'php_values'
> ; - 'php_admin_values'
> ; When not set, the global prefix (or /usr) applies instead.
> ; Note: This directive can also be relative to the global prefix.
> ; Default Value: none
> ;prefix = /path/to/pools/$pool
>
> ; Unix user/group of processes
> ; Note: The user is mandatory. If the group is not set, the default user's
> group
> ; will be used.
> user = www-data
> group = www-data
>
> ; The address on which to accept FastCGI requests.
> ; Valid syntaxes are:
> ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific
> address
> on
> ; a specific port;
> ; 'port' - to listen on a TCP socket to all addresses on
> a
> ; specific port;
> ; '/path/to/unix/socket' - to listen on a unix socket.
> ; Note: This value is mandatory.
> listen = localhost:9000
>
> ; Set listen(2) backlog.
> ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
> ;listen.backlog = 128
>
> ; Set permissions for unix socket, if one is used. In Linux, read/write
> ; permissions must be set in order to allow connections from a web server..
> Many
> ; BSD-derived systems allow connections regardless of permissions.
> ; Default Values: user and group are set as the running user
> ; mode is set to 0666
> ;listen.owner = www-data
> ;listen.group = www-data
> ;listen.mode = 0666
>
> ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
> ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the
> original
> ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each
> address
> ; must be separated by a comma. If this value is left blank, connections
> will be
> ; accepted from any ip address.
> ; Default Value: any
> ;listen.allowed_clients = 127.0.0.1
>
> ; Choose how the process manager will control the number of child
> processes.
> ; Possible Values:
> ; static - a fixed number (pm.max_children) of child processes;
> ; dynamic - the number of child processes are set dynamically based on
> the
> ; following directives. With this process management, there
> will
> be
> ; always at least 1 children.
> ; pm.max_children - the maximum number of children that
> can
> ; be alive at the same time.
> ; pm.start_servers - the number of children created on
> startup.
> ; pm.min_spare_servers - the minimum number of children in
> 'idle'
> ; state (waiting to process). If the
> number
> ; of 'idle' processes is less than this
> ; number then some children will be
> created.
> ; pm.max_spare_servers - the maximum number of children in
> 'idle'
> ; state (waiting to process). If the
> number
> ; of 'idle' processes is greater than
> this
> ; number then some children will be
> killed.
> ; ondemand - no children are created at startup. Children will be forked
> when
> ; new requests will connect. The following parameter are used:
> ; pm.max_children - the maximum number of children
> that
> ; can be alive at the same time.
> ; pm.process_idle_timeout - The number of seconds after which
> ; an idle process will be killed.
> ; Note: This value is mandatory.
> pm = dynamic
>
> ; The number of child processes to be created when pm is set to 'static'
> and
> the
> ; maximum number of child processes when pm is set to 'dynamic' or
> 'ondemand'.
> ; This value sets the limit on the number of simultaneous requests that
> will
> be
> ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
> ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original
> PHP
> ; CGI. The below defaults are based on a server without much resources.
> Don't
> ; forget to tweak pm.* to fit your needs.
> ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
> ; Note: This value is mandatory.
> pm.max_children = 900
>
> ; The number of child processes created on startup.
> ; Note: Used only when pm is set to 'dynamic'
> ; Default Value: min_spare_servers + (max_spare_servers -
> min_spare_servers)
> / 2
> pm.start_servers = 70
>
> ; The desired minimum number of idle server processes.
> ; Note: Used only when pm is set to 'dynamic'
> ; Note: Mandatory when pm is set to 'dynamic'
> pm.min_spare_servers = 40
>
> ; The desired maximum number of idle server processes.
> ; Note: Used only when pm is set to 'dynamic'
> ; Note: Mandatory when pm is set to 'dynamic'
> pm.max_spare_servers = 80
>
> ; The number of seconds after which an idle process will be killed.
> ; Note: Used only when pm is set to 'ondemand'
> ; Default Value: 10s
> ;pm.process_idle_timeout = 10s;
>
> ; The number of requests each child process should execute before
> respawning.
> ; This can be useful to work around memory leaks in 3rd party libraries.
> For
> ; endless request processing specify '0'. Equivalent to
> PHP_FCGI_MAX_REQUESTS.
> ; Default Value: 0
> pm.max_requests = 10000
>
> ; The URI to view the FPM status page. If this value is not set, no URI
> will
> be
> ; recognized as a status page. It shows the following informations:
> ; pool - the name of the pool;
> ; process manager - static, dynamic or ondemand;
> ; start time - the date and time FPM has started;
> ; start since - number of seconds since FPM has started;
> ; accepted conn - the number of request accepted by the pool;
> ; listen queue - the number of request in the queue of pending
> ; connections (see backlog in listen(2));
> ; max listen queue - the maximum number of requests in the queue
> ; of pending connections since FPM has started;
> ; listen queue len - the size of the socket queue of pending
> connections;
> ; idle processes - the number of idle processes;
> ; active processes - the number of active processes;
> ; total processes - the number of idle + active processes;
> ; max active processes - the maximum number of active processes since FPM
> ; has started;
> ; max children reached - number of times, the process limit has been
> reached,
> ; when pm tries to start more children (works only
> for
> ; pm 'dynamic' and 'ondemand');
> ; Value are updated in real time.
> ; Example output:
> ; pool: www
> ; process manager: static
> ; start time: 01/Jul/2011:17:53:49 +0200
> ; start since: 62636
> ; accepted conn: 190460
> ; listen queue: 0
> ; max listen queue: 1
> ; listen queue len: 42
> ; idle processes: 4
> ; active processes: 11
> ; total processes: 15
> ; max active processes: 12
> ; max children reached: 0
> ;
> ; By default the status page output is formatted as text/plain. Passing
> either
> ; 'html', 'xml' or 'json' in the query string will return the corresponding
> ; output syntax. Example:
> ; http://www.foo.bar/status
> ; http://www.foo.bar/status?json
> ; http://www.foo.bar/status?html
> ; http://www.foo.bar/status?xml
> ;
> ; By default the status page only outputs short status. Passing 'full' in
> the
> ; query string will also return status for each pool process.
> ; Example:
> ; http://www.foo.bar/status?full
> ; http://www.foo.bar/status?json&full
> ; http://www.foo.bar/status?html&full
> ; http://www.foo.bar/status?xml&full
> ; The Full status returns for each process:
> ; pid - the PID of the process;
> ; state - the state of the process (Idle, Running, ...);
> ; start time - the date and time the process has started;
> ; start since - the number of seconds since the process has
> started;
> ; requests - the number of requests the process has served;
> ; request duration - the duration in µs of the requests;
> ; request method - the request method (GET, POST, ...);
> ; request URI - the request URI with the query string;
> ; content length - the content length of the request (only with
> POST);
> ; user - the user (PHP_AUTH_USER) (or '-' if not set);
> ; script - the main script called (or '-' if not set);
> ; last request cpu - the %cpu the last request consumed
> ; it's always 0 if the process is not in Idle
> state
> ; because CPU calculation is done when the request
> ; processing has terminated;
> ; last request memory - the max amount of memory the last request
> consumed
> ; it's always 0 if the process is not in Idle
> state
> ; because memory calculation is done when the
> request
> ; processing has terminated;
> ; If the process is in Idle state, then informations are related to the
> ; last request the process has served. Otherwise informations are related
> to
> ; the current request being served.
> ; Example output:
> ; ************************
> ; pid: 31330
> ; state: Running
> ; start time: 01/Jul/2011:17:53:49 +0200
> ; start since: 63087
> ; requests: 12808
> ; request duration: 1250261
> ; request method: GET
> ; request URI: /test_mem.php?N=10000
> ; content length: 0
> ; user: -
> ; script: /home/fat/web/docs/php/test_mem.php
> ; last request cpu: 0.00
> ; last request memory: 0
> ;
> ; Note: There is a real-time FPM status monitoring sample web page
> available
> ; It's available in: ${prefix}/share/fpm/status.html
> ;
> ; Note: The value must start with a leading slash (/). The value can be
> ; anything, but it may not be a good idea to use the .php extension
> or
> it
> ; may conflict with a real PHP file.
> ; Default Value: not set
> ;pm.status_path = /status
>
> ; The ping URI to call the monitoring page of FPM. If this value is not
> set,
> no
> ; URI will be recognized as a ping page. This could be used to test from
> outside
> ; that FPM is alive and responding, or to
> ; - create a graph of FPM availability (rrd or such);
> ; - remove a server from a group if it is not responding (load balancing);
> ; - trigger alerts for the operating team (24/7).
> ; Note: The value must start with a leading slash (/). The value can be
> ; anything, but it may not be a good idea to use the .php extension
> or
> it
> ; may conflict with a real PHP file.
> ; Default Value: not set
> ;ping.path = /ping
>
> ; This directive may be used to customize the response of a ping request.
> The
> ; response is formatted as text/plain with a 200 response code.
> ; Default Value: pong
> ;ping.response = pong
>
> ; The access log file
> ; Default: not set
> ;access.log = log/$pool.access.log
>
> ; The access log format.
> ; The following syntax is allowed
> ; %%: the '%' character
> ; %C: %CPU used by the request
> ; it can accept the following format:
> ; - %{user}C for user CPU only
> ; - %{system}C for system CPU only
> ; - %{total}C for user + system CPU (default)
> ; %d: time taken to serve the request
> ; it can accept the following format:
> ; - %{seconds}d (default)
> ; - %{miliseconds}d
> ; - %{mili}d
> ; - %{microseconds}d
> ; - %{micro}d
> ; %e: an environment variable (same as $_ENV or $_SERVER)
> ; it must be associated with embraces to specify the name of the env
> ; variable. Some exemples:
> ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
> ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
> ; %f: script filename
> ; %l: content-length of the request (for POST request only)
> ; %m: request method
> ; %M: peak of memory allocated by PHP
> ; it can accept the following format:
> ; - %{bytes}M (default)
> ; - %{kilobytes}M
> ; - %{kilo}M
> ; - %{megabytes}M
> ; - %{mega}M
> ; %n: pool name
> ; %o: ouput header
> ; it must be associated with embraces to specify the name of the
> header:
> ; - %{Content-Type}o
> ; - %{X-Powered-By}o
> ; - %{Transfert-Encoding}o
> ; - ....
> ; %p: PID of the child that serviced the request
> ; %P: PID of the parent of the child that serviced the request
> ; %q: the query string
> ; %Q: the '?' character if query string exists
> ; %r: the request URI (without the query string, see %q and %Q)
> ; %R: remote IP address
> ; %s: status (response code)
> ; %t: server time the request was received
> ; it can accept a strftime(3) format:
> ; %d/%b/%Y:%H:%M:%S %z (default)
> ; %T: time the log has been written (the request has finished)
> ; it can accept a strftime(3) format:
> ; %d/%b/%Y:%H:%M:%S %z (default)
> ; %u: remote user
> ;
> ; Default: "%R - %u %t \"%m %r\" %s"
> ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
>
> ; The log file for slow requests
> ; Default Value: not set
> ; Note: slowlog is mandatory if request_slowlog_timeout is set
> ;slowlog = log/$pool.log.slow
>
> ; The timeout for serving a single request after which a PHP backtrace will
> be
> ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
> ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
> ; Default Value: 0
> ;request_slowlog_timeout = 0
>
> ; The timeout for serving a single request after which the worker process
> will
> ; be killed. This option should be used when the 'max_execution_time' ini
> option
> ; does not stop script execution for some reason. A value of '0' means
> 'off'.
> ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
> ; Default Value: 0
> ;request_terminate_timeout = 0
>
> ; Set open file descriptor rlimit.
> ; Default Value: system defined value
> ;rlimit_files = 1024
>
> ; Set max core size rlimit.
> ; Possible Values: 'unlimited' or an integer greater or equal to 0
> ; Default Value: system defined value
> ;rlimit_core = 0
>
> ; Chroot to this directory at the start. This value must be defined as an
> ; absolute path. When this value is not set, chroot is not used.
> ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
> ; of its subdirectories. If the pool prefix is not set, the global prefix
> ; will be used instead.
> ; Note: chrooting is a great security feature and should be used whenever
> ; possible. However, all PHP paths will be relative to the chroot
> ; (error_log, sessions.save_path, ...).
> ; Default Value: not set
> ;chroot =
>
> ; Chdir to this directory at the start.
> ; Note: relative path can be used.
> ; Default Value: current directory or / when chroot
> chdir = /
>
> ; Redirect worker stdout and stderr into main error log. If not set, stdout
> and
> ; stderr will be redirected to /dev/null according to FastCGI specs.
> ; Note: on highloaded environement, this can cause some delay in the page
> ; process time (several ms).
> ; Default Value: no
> ;catch_workers_output = yes
>
> ; Limits the extensions of the main script FPM will allow to parse. This
> can
> ; prevent configuration mistakes on the web server side. You should only
> limit
> ; FPM to .php extensions to prevent malicious users to use other extensions
> to
> ; exectute php code.
> ; Note: set an empty value to allow all extensions.
> ; Default Value: .php
> ;security.limit_extensions = .php .php3 .php4 .php5
>
> ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken
> from
> ; the current environment.
> ; Default Value: clean env
> ;env[HOSTNAME] = $HOSTNAME
> ;env[PATH] = /usr/local/bin:/usr/bin:/bin
> ;env[TMP] = /tmp
> ;env[TMPDIR] = /tmp
> ;env[TEMP] = /tmp
>
> ; Additional php.ini defines, specific to this pool of workers. These
> settings
> ; overwrite the values previously defined in the php.ini. The directives
> are
> the
> ; same as the PHP SAPI:
> ; php_value/php_flag - you can set classic ini defines which
> can
> ; be overwritten from PHP call
> 'ini_set'.
>
> ; php_admin_value/php_admin_flag - these directives won't be overwritten
> by
> ; PHP call 'ini_set'
> ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
>
> ; Defining 'extension' will load the corresponding shared extension from
> ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
> ; overwrite previously defined php.ini values, but will append the new
> value
> ; instead.
>
> ; Note: path INI options can be relative and will be expanded with the
> prefix
> ; (pool, global or /usr)
>
> ; Default Value: nothing is defined by default except the values in php.ini
> and
> ; specified at startup with the -d argument
> ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f
> www@my.domain.com
> ;php_flag[display_errors] = off
> ;php_admin_value[error_log] = /var/log/fpm-php.www.log
> ;php_admin_flag[log_errors] = on
> ;php_admin_value[memory_limit] = 32M
>
> Posted at Nginx Forum:
> http://forum.nginx.org/read.php?2,240765,240790#msg-240790
>
> _______________________________________________
> nginx mailing list
> nginx@nginx.org
> http://mailman.nginx.org/mailman/listinfo/nginx
>
_______________________________________________
nginx mailing list
nginx@nginx.org
http://mailman.nginx.org/mailman/listinfo/nginx